Skip to content

Add initial genpd support for omap PRM driver

Tony Lindgren linux-arm-kernel linux-devicetree linux-omap lkml 4 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v4 Latest6 patches 4 repliesIn review
  2. v36 patches 1 replySuperseded
  3. v26 patches 1 replySuperseded
Earlier versions · 1
VersionPostedPatchesRepliesStatus
v16 patches4 repliesSuperseded

Changes in v4 from the cover letter

- Drop the unnecessary __maybe_unused as that's no longer needed

Patches in v4 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/6dt-bindings: omap: Update PRM binding for genpdDocumentation/devicetree/bindings/arm/omap/prm-inst.txt+2 -01 reply
2/6soc: ti: omap-prm: Add basic power domain supportarch/arm/mach-omap2/Kconfig drivers/soc/ti/omap_prm.c+228 -10 replies
3/6soc: ti: omap-prm: Configure sgx power domain for am3 and am4drivers/soc/ti/omap_prm.c+22 -20 replies
4/6soc: ti: omap-prm: Configure omap4 and 5 l4_abe power domaindrivers/soc/ti/omap_prm.c+22 -00 replies
5/6ARM: dts: Configure am3 and am4 sgx for genpd and drop platform dataarch/arm/boot/dts/am33xx.dtsi arch/arm/boot/dts/am4372.dtsi arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c +3 more+4 -600 replies
6/6ARM: dts: Configure omap4 and 5 l4_abe for genpd and drop platform dataarch/arm/boot/dts/omap4-l4-abe.dtsi arch/arm/boot/dts/omap4.dtsi arch/arm/boot/dts/omap5-l4-abe.dtsi +3 more+20 -680 replies

Reviews trailers per patch

1 of 6 patches has a Reviewed-by or Acked-by of their own; the series has one for all of them.

PatchRob HerringSantosh Shilimkar
SeriesA-b
1/6A-b
2/6
3/6
4/6
5/6
6/6

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v4 thread

Cover letter [PATCHv4 0/6] Add initial genpd support for omap PRM driver

Hi all,

Here's v4 set of patches to add genpd support to the PRM (Power and Reset Module) driver.

Initially we just add one hardware accelerator power domain for sgx, and one interconnect instance for l4_abe. The rest of the SoC specific domain data is probably best added one SoC at a time based on generated data.

Regards,

Tony

Changes since v3:
- Drop the unnecessary __maybe_unused as that's no longer needed

Changes since v2:

- Update binding to clarify a single power domain provider

- Unwrap generic domain configrations for __maybe_unused

Changes since v1:

- Dropped clocks from the binding and prm driver as there's no need for them as pointed out by Tero

- Add checking for domain transition bit in pwrstst register as pointed out by Tero

- Add omap_prm_domain_show_state() for CONFIG_DEBUG

Tony Lindgren (6):
dt-bindings: omap: Update PRM binding for genpd
soc: ti: omap-prm: Add basic power domain support
soc: ti: omap-prm: Configure sgx power domain for am3 and am4
soc: ti: omap-prm: Configure omap4 and 5 l4_abe power domain
ARM: dts: Configure am3 and am4 sgx for genpd and drop platform data
ARM: dts: Configure omap4 and 5 l4_abe for genpd and drop platform
data

 .../devicetree/bindings/arm/omap/prm-inst.txt |   2 +
 arch/arm/boot/dts/am33xx.dtsi                 |   2 +
 arch/arm/boot/dts/am4372.dtsi                 |   2 +
 arch/arm/boot/dts/omap4-l4-abe.dtsi           |   6 +-
 arch/arm/boot/dts/omap4.dtsi                  |   6 +
 arch/arm/boot/dts/omap5-l4-abe.dtsi           |   6 +-
 arch/arm/boot/dts/omap5.dtsi                  |   6 +
 arch/arm/mach-omap2/Kconfig                   |   1 +
 .../omap_hwmod_33xx_43xx_interconnect_data.c  |  16 -
 .../omap_hwmod_33xx_43xx_ipblock_data.c       |  40 ---
 arch/arm/mach-omap2/omap_hwmod_33xx_data.c    |   2 -
 arch/arm/mach-omap2/omap_hwmod_43xx_data.c    |   2 -
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c    |  33 ---
 arch/arm/mach-omap2/omap_hwmod_54xx_data.c    |  31 --
 drivers/soc/ti/omap_prm.c                     | 274 +++++++++++++++++-
 15 files changed, 298 insertions(+), 131 deletions(-)
Signature · 1 line
2.27.0