Skip to content

bcache-tools: suport zoned device as making backing evice

Coly Li linux-bcache linux-block 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3bcache-tools: set zoned size aligned data_offset on backing device for zoned deviveMakefile make.c zoned.c +1 more+110 -30 replies
2/3bcache-tools: add is_zoned_device()zoned.c zoned.h+6 -00 replies
3/3bcache-tools: convert writeback to writethrough mode for zoned backing devicemake.c+13 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/3] bcache-tools: suport zoned device as making backing evice

Hi folks,

This series is for bcache-tools to support making zoned device as bcache backing device.

There are two major ideas to support zoned device as bcache backing device,
- The super block data_offset should be aligned to zone size. By default the data_offset is set to 1 zone size for zoned backing device.
- Writeback mode is not supported yet. If the cache mode is explicitly set to writeback, print message to terminal to inform users that the cache mode is converted to wrightthough.

After the data_offset and cache mode is set properly, the rested stuffs for zoned device support are from bcache driver in Linux kernel.

Thanks for your review in advance.

Coly Li
---

Coly Li (3):
bcache-tools: set zoned size aligned data_offset on backing device for
zoned devive
bcache-tools: add is_zoned_device()
bcache-tools: convert writeback to writethrough mode for zoned backing
device

 Makefile |  4 +--
 make.c   | 20 +++++++++++-
 zoned.c  | 94 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 zoned.h  | 14 +++++++++
 4 files changed, 129 insertions(+), 3 deletions(-)
 create mode 100644 zoned.c
 create mode 100644 zoned.h
Signature · 1 line
2.25.0