Skip to content

arm: Juno board updates and PCIe/SATA enablement

Andre Przywara u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest7 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/7arm: vexpress64: Fix counter frequencyinclude/configs/vexpress_aemv8a.h+1 -12 replies
2/7net: dm: Remove warning about EEPROM provided MAC addressnet/eth-uclass.c+0 -23 replies
3/7net: smc911x: Properly handle EEPROM MAC addressdrivers/net/smc911x.c+36 -243 replies
4/7arm: juno: Enable DM_ETHarch/arm/Kconfig board/armltd/vexpress64/vexpress64.c+3 -12 replies
5/7sata_sil: Enable DM_PCI operationdrivers/ata/sata_sil.c drivers/ata/sata_sil.h+15 -22 replies
6/7arm: juno: Enable PCIboard/armltd/vexpress64/pcie.c configs/vexpress_aemv8a_juno_defconfig+14 -52 replies
7/7arm: juno: Enable SATA controllerconfigs/vexpress_aemv8a_juno_defconfig+3 -22 replies

Reviews trailers per patch

All 7 patches have a Reviewed-by or Acked-by.

PatchRamon FriedLinus Walleij
1/7R-b
2/7R-b R-b
3/7R-b R-b
4/7R-b
5/7R-b
6/7R-b
7/7R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/7] arm: Juno board updates and PCIe/SATA enablement

This updates the Arm Juno board to fix a small bug, enable DM_ETH and also allow the usage of PCIe devices, foremost the on-board SATA controller.

Patch 1/7 is a "typo" fix for the counter frequency.
Patch 2, 3 and 4 allow to use the smc911x driver with DM_ETH on the Juno board, that removes the deprecation warning.
Patch 5 allows the sata_sil driver to be used with DM_PCI compliant host controller drivers. Patch 6 tells U-Boot about the PCIe controller on the two later revision Juno boards. So far we were initialising the host bridge, to pave the way for any OS driver, but denied U-Boot itself to use PCIe devices.
The final patch just enables the sata_sil driver, which allows loading images from SATA hard drives connected to the on-board ports.

This allows me to boot an off-the-shelf Ubuntu installation using Grub/EFI from an SSD.

Cheers,
Andre

Andre Przywara (7):
arm: vexpress64: Fix counter frequency
net: dm: Remove warning about EEPROM provided MAC address
net: smc911x: Properly handle EEPROM MAC address
arm: juno: Enable DM_ETH
sata_sil: Enable DM_PCI operation
arm: juno: Enable PCI
arm: juno: Enable SATA controller

 arch/arm/Kconfig                       |  2 +-
 board/armltd/vexpress64/pcie.c         | 14 +++---
 board/armltd/vexpress64/vexpress64.c   |  2 +
 configs/vexpress_aemv8a_juno_defconfig | 10 ++++-
 drivers/ata/sata_sil.c                 | 11 ++++-
 drivers/ata/sata_sil.h                 |  6 ++-
 drivers/net/smc911x.c                  | 60 +++++++++++++++-----------
 include/configs/vexpress_aemv8a.h      |  2 +-
 net/eth-uclass.c                       |  2 -
 9 files changed, 72 insertions(+), 37 deletions(-)
Signature · 1 line
2.17.5