Skip to content

phy: bcm63xx-usbh: Add BCM63xx USBH driver

Álvaro Fernández Rojas linux-arm-kernel linux-devicetree lkml 8 versions – Applied

Status from this message: Applied, thanks

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v8 Latest2 patches 2 repliesApplied
  2. v72 patches 1 replySuperseded
  3. v62 patches 4 repliesSuperseded
Earlier versions · 5
VersionPostedPatchesRepliesStatus
v52 patches5 repliesSuperseded
v42 patches2 repliesSuperseded
v32 patches4 repliesSuperseded
v22 patches1 replySuperseded
v12 patches7 repliesSuperseded

Patches in v8 Applied

#Subject and filesSizeRepliesApplied
1/2dt-bindings: phy: add bcm63xx-usbh bindingsDocumentation/devicetree/bindings/phy/brcm,bcm63xx-usbh-phy.yaml+79 -01 reply
2/2phy: bcm63xx-usbh: Add BCM63xx USBH driverdrivers/phy/broadcom/Kconfig drivers/phy/broadcom/Makefile drivers/phy/broadcom/phy-bcm63xx-usbh.c+466 -00 replies

Reviews trailers per patch

1 of 2 patches has a Reviewed-by or Acked-by.

PatchFlorian FainelliRob Herring
1/2R-b R-b
2/2

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v8 thread

Cover letter [PATCH v8 0/2] phy: bcm63xx-usbh: Add BCM63xx USBH driver

Add BCM63xx USBH PHY driver for BMIPS.

v8: readd Simon as author and remove his email address from the source code.
v7: remove Simon from authors and introduce changes suggested by Rob:
- Move clock conditions to the main section.
- Set missing additionalProperties to false.
v6: introduce changes suggested by Rob and Vinod:
- Remove BMIPS_GENERIC default from kconfig.
- Print registered message as debug.
- Add another if case to device tree binding for SoCs with just 1 clock.
- Ignored "additionalProperties: false" suggestion since it triggers a warning. This has been reported, but I haven't received any answer yet.
v5: use devm_reset_control_get_exclusive.
v4: fix dt-bindings documentation and improve device mode config.
v3: introduce changes suggested by Florian:
- Add support for device mode.
v2: introduce changes suggested by Florian:
- phy-cells changed to 1.
- Drop OF dependency (use device_get_match_data).
- Drop __initconst from variant tables.
- Use devm_clk_get_optional.

Álvaro Fernández Rojas (2):
dt-bindings: phy: add bcm63xx-usbh bindings
phy: bcm63xx-usbh: Add BCM63xx USBH driver

 .../bindings/phy/brcm,bcm63xx-usbh-phy.yaml   |  79 +++
 drivers/phy/broadcom/Kconfig                  |   8 +
 drivers/phy/broadcom/Makefile                 |   1 +
 drivers/phy/broadcom/phy-bcm63xx-usbh.c       | 457 ++++++++++++++++++
 4 files changed, 545 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/brcm,bcm63xx-usbh-phy.yaml
 create mode 100644 drivers/phy/broadcom/phy-bcm63xx-usbh.c
Signature · 1 line
2.27.0