Skip to content

RFC dm-crypt excessive overhead

Ignat Korchagin dm-crypt dm-devel lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 RFC Latest1 patch 29 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/1Add DM_CRYPT_FORCE_INLINE flag to dm-crypt targetdrivers/md/dm-crypt.c+43 -1210 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [RFC PATCH 0/1] dm-crypt excessive overhead

This is a follow up from the long-forgotten [1], but with some more convincing evidence. Consider the following script:

#!/bin/bash -e

# create 4G ramdisk
sudo modprobe brd rd_nr=1 rd_size=4194304
# create a dm-crypt device with NULL cipher on top of /dev/ram0
echo '0 8388608 crypt capi:ecb(cipher_null) - 0 /dev/ram0 0' | sudo dmsetup create eram0
# create a dm-crypt device with NULL cipher and custom force_inline flag
echo '0 8388608 crypt capi:ecb(cipher_null) - 0 /dev/ram0 0 1 force_inline' | sudo dmsetup create inline-eram0
# read all data from /dev/ram0
sudo dd if=/dev/ram0 bs=4k iflag=direct | sha256sum
# read the same data from /dev/mapper/eram0
sudo dd if=/dev/mapper/eram0 bs=4k iflag=direct | sha256sum
# read the same data from /dev/mapper/inline-eram0
sudo dd if=/dev/mapper/inline-eram0 bs=4k iflag=direct | sha256sum

This script creates a ramdisk (to eliminate hardware bias in the benchmark) and two dm-crypt instances on top. Both dm-crypt instances use the NULL cipher to eliminate potentially expensive crypto bias (the NULL cipher just uses memcpy for "encyption"). The first instance is the current dm-crypt implementation from 5.8-rc1, the second is the dm-crypt instance with a custom new flag enabled from the patch attached to this thread. On my VM (Debian in VirtualBox with 4 cores on 2.8 GHz Quad-Core Intel Core i7) I get the following output (formatted for better readability):

# plain ram0
1048576+0 records in
1048576+0 records out
4294967296 bytes (4.3 GB, 4.0 GiB) copied, 21.2305 s, 202 MB/s
8479e43911dc45e89f934fe48d01297e16f51d17aa561d4d1c216b1ae0fcddca  -
# eram0 (current dm-crypt)
1048576+0 records in
1048576+0 records out
4294967296 bytes (4.3 GB, 4.0 GiB) copied, 53.2212 s, 80.7 MB/s
8479e43911dc45e89f934fe48d01297e16f51d17aa561d4d1c216b1ae0fcddca  -
# inline-eram0 (patched dm-crypt)
1048576+0 records in
1048576+0 records out
4294967296 bytes (4.3 GB, 4.0 GiB) copied, 21.3472 s, 201 MB/s
8479e43911dc45e89f934fe48d01297e16f51d17aa561d4d1c216b1ae0fcddca  -

As we can see, current dm-crypt implementation creates a significant IO performance overhead (at least on small IO block sizes) for both latency and throughput. We suspect offloading IO request processing into workqueues and async threads is more harmful these days with the modern fast storage. I also did some digging into the dm-crypt git history and much of this async processing is not needed anymore, because the reasons it was added are mostly gone from the kernel. More details can be found in [2] (see "Git archeology" section).

We have been running the attached patch on different hardware generations in more than 200 datacentres on both SATA SSDs and NVME SSDs and so far were very happy with the performance benefits.

[1]: https://www.spinics.net/lists/dm-crypt/msg07516.html
[2]: https://blog.cloudflare.com/speeding-up-linux-disk-encryption/

Ignat Korchagin (1):
Add DM_CRYPT_FORCE_INLINE flag to dm-crypt target

 drivers/md/dm-crypt.c | 55 +++++++++++++++++++++++++++++++++----------
 1 file changed, 43 insertions(+), 12 deletions(-)
Signature · 1 line
2.20.1