Skip to content

ARM: sunxi: Add support for MSI Primo73 tablet

Chen-Yu Tsai dri-devel linux-arm-kernel linux-devicetree 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest5 patches 9 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5dt-bindings: display: panel-dpi: Add bits-per-color propertyDocumentation/devicetree/bindings/display/panel/panel-dpi.yaml+4 -06 replies
2/5drm/panel: simple: Set bpc from bits-per-color DT property for panel-dpidrivers/gpu/drm/panel/panel-simple.c+1 -00 replies
3/5dt-bindings: arm: sunxi: Add compatible for MSI Primo73 tabletDocumentation/devicetree/bindings/arm/sunxi.yaml+5 -01 reply
4/5ARM: dts: sun7i: Add LCD0 RGB888 pinsarch/arm/boot/dts/sun7i-a20.dtsi+12 -00 replies
5/5ARM: dts: sun7i: Add MSI Primo73 tabletarch/arm/boot/dts/Makefile arch/arm/boot/dts/sun7i-a20-primo73.dts+280 -02 replies

Reviews trailers per patch

1 of 5 patches has a Reviewed-by or Acked-by.

PatchRob Herring
1/5
2/5
3/5A-b
4/5
5/5

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/5] ARM: sunxi: Add support for MSI Primo73 tablet

From: Chen-Yu Tsai <[email protected]>

Hi everyone,

This series add support for MSI's Primo73 tablet. This is a 7" tablet based on Allwinner's A20 SoC.

The tablet uses some unknown LCD panel, with only serial number markings, and what appears to be a part number. Searching the Internet for said part number yielded no usable results. Hence this panel is described solely using the panel-dpi binding. The display timing values were retrieved from the hardware description file from the original Android system.

A new property for the panel-dpi binding is added to describe the color depth of the panel, which is normally included the panel description in panel-simple. Otherwise this would be undefined in the panel-dpi case and left to encoder drivers to make up. I believe this would be separate from the bus format, which was added earlier and then retracted.

Patches 1 and 2 add the new color depth property to the device tree binding and the panel-simple driver.

Patch 3 adds the board compatible string to the list of boards.

Patch 4 adds a pinmux option for LCD0 full 24-bit output, with control signals, for the A20.

Patch 5 adds the device tree file for the Primo73.

Please have a look.

Regards
ChenYu

Chen-Yu Tsai (5):
dt-bindings: display: panel-dpi: Add bits-per-color property drm/panel: simple: Set bpc from bits-per-color DT property for
panel-dpi
dt-bindings: arm: sunxi: Add compatible for MSI Primo73 tablet
ARM: dts: sun7i: Add LCD0 RGB888 pins
ARM: dts: sun7i: Add MSI Primo73 tablet

 .../devicetree/bindings/arm/sunxi.yaml        |   5 +
 .../bindings/display/panel/panel-dpi.yaml     |   4 +
 arch/arm/boot/dts/Makefile                    |   1 +
 arch/arm/boot/dts/sun7i-a20-primo73.dts       | 279 ++++++++++++++++++
 arch/arm/boot/dts/sun7i-a20.dtsi              |  12 +
 drivers/gpu/drm/panel/panel-simple.c          |   1 +
 6 files changed, 302 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun7i-a20-primo73.dts
Signature · 1 line
2.27.0