Skip to content

Add DT to get PCIe working in J721E SoC

Kishon Vijay Abraham I linux-arm-kernel linux-devicetree lkml 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2arm64: dts: ti: k3-j721e-main: Add PCIe device tree nodesarch/arm64/boot/dts/ti/k3-j721e-main.dtsi arch/arm64/boot/dts/ti/k3-j721e.dtsi+222 -10 replies
2/2arm64: dts: ti: k3-j721e-common-proc-board: Configure the PCIe instancesarch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts+80 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] Add DT to get PCIe working in J721E SoC

Series adds device tree of I2C and PCIe DT nodes to get PCIe working in both RC mode and EP mode in J721E.

The PCIe support patch series is queued in Lorenzo's branch [1]

This patch series is rebased to Tero's ti-k3-next branch [2]

[1] -> https://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/pci.git/log/?h=pci/cadence
[2] -> https://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux.git/log/?h=ti-k3-next

Kishon Vijay Abraham I (2):
arm64: dts: ti: k3-j721e-main: Add PCIe device tree nodes
arm64: dts: ti: k3-j721e-common-proc-board: Configure the PCIe
instances

 .../dts/ti/k3-j721e-common-proc-board.dts     |  80 +++++++
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     | 218 ++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-j721e.dtsi          |   5 +-
 3 files changed, 302 insertions(+), 1 deletion(-)
Signature · 1 line
2.17.1