Skip to content

iio: light: Support AMS AS73211 digital XYZ sensor

Christian Eggers linux-devicetree linux-iio lkml 6 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v6 Latest2 patches 8 repliesIn review
  2. v52 patches 4 repliesSuperseded
  3. v42 patches 6 repliesSuperseded
Earlier versions · 3
VersionPostedPatchesRepliesStatus
v32 patches3 repliesSuperseded
v22 patches5 repliesSuperseded
v12 patches1 replySuperseded

Changes in v6 from the cover letter

---------------
- [2/2] Fixed remaining open points reported by Andy Shevchenko.

Patches in v6 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2dt-bindings: iio: light: add AMS AS73211 supportDocumentation/devicetree/bindings/iio/light/ams,as73211.yaml+54 -01 reply
2/2iio: light: as73211: New driverMAINTAINERS drivers/iio/light/Kconfig drivers/iio/light/Makefile +1 more+824 -016 replies

Reviews trailers per patch

All 2 patches have a Reviewed-by or Acked-by.

PatchRob HerringAndy Shevchenko
1/2R-b
2/2R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v6 thread

Cover letter [PATCH v6 0/2] iio: light: Support AMS AS73211 digital XYZ sensor

This series adds support for the AMS AS73211 digital XYZ sensor.

Probably everything is fine now...

Changes in v6:
---------------
- [2/2] Fixed remaining open points reported by Andy Shevchenko.

Changes in v5:
---------------
- [1/2] Reviewed by Rob Herring
- [2/2] Added KHZ_PER_HR define
- [2/2] Added AS73211_SAMPLE_FREQ_BASE define
- [2/2] Slight changes in comments
- [2/2] Claim direct mode in write_raw()
- [2/2] Saturate only in case of overflow
- [2/2] Don't set indio_dev->dev.parent
- [2/2] Fix error path (order) in probe()

Changes in v4:
---------------
- Integrated 2nd review from Andy Shevchenko
- Use more devm_ functions in as73211_probe()

Changes in v3:
---------------
- Integrated comments from Andy Shevchenko
- Integrated comments from Jonathan Cameron

Changes in v2:
---------------
- Fix $id in dt binding
- Document full I2C address range in "reg" property
- Move "buffer" member out of "struct as73211_data"
- Fix sparse warnings by using correct data types