Skip to content

drm/bridge: Update tc358767 and nxp-ptn3460 to support chained bridges

Sam Ravnborg dri-devel 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v5 Latest5 patches 3 repliesIn review

Changes in v5 from the cover letter

- Applied reviewed patches, so we went from 15 to 5
- Fixed bug in connector creation in both drivers

Patches in v5 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5drm/bridge: tc358767: add detect bridge operationdrivers/gpu/drm/bridge/tc358767.c+20 -100 replies
2/5drm/bridge: tc358767: add get_edid bridge operationdrivers/gpu/drm/bridge/tc358767.c+18 -160 replies
3/5drm/bridge: tc358767: add drm_panel_bridge supportdrivers/gpu/drm/bridge/tc358767.c+35 -351 reply
4/5drm/bridge: nxp-ptn3460: add get_edid bridge operationdrivers/gpu/drm/bridge/nxp-ptn3460.c+25 -180 replies
5/5drm/bridge: nxp-ptn3460: add drm_panel_bridge supportdrivers/gpu/drm/bridge/nxp-ptn3460.c+20 -401 reply

Reviews trailers per patch

All 5 patches have a Reviewed-by or Acked-by.

PatchLaurent Pinchart
1/5R-b
2/5R-b
3/5R-b
4/5R-b
5/5R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v5 thread

Cover letter [PATCH v5 0/5] drm/bridge: Update tc358767 and nxp-ptn3460 to support chained bridges

This patch-set aims to make connector creation optional and prepare the bridge drivers for use in a chained setup.

The objective is that all bridge drivers shall support a chained setup connector creation is moved to the display drivers.
This is just one step on this path.

The general approach for the bridge drivers:
- Introduce bridge operations
- Introduce use of panel bridge and make connector creation optional

v5:
- Applied reviewed patches, so we went from 15 to 5
- Fixed bug in connector creation in both drivers

v4:
- Dropped patch for ti-sn65dsi86. Await full conversion
- Dropped patch for ti-tpd12s015. It was wrong (Laurent)
- Drop boe,hv070wsa-100 patch, it was applied
- Combined a few patches to fix connector created twice (Laurent)
- Fix memory leak in get_edid (Laurent)
- Added patch to validate panel descriptions in panel-simple
- Set bridge.type in relevant drivers

v3:
- Rebase on top of drm-misc-next
- Address kbuild test robot feedback

v2:
- Updated bus_flags for boe,hv070wsa-100
- Collected r-b, but did not apply patches yet
- On the panel side the panel-simple driver gained a default connector type for all the dumb panels that do not include so in their description.
With this change panels always provide a connector type, and we have the potential to drop most uses of devm_drm_panel_bridge_add_typed().
- Added conversion of a few more bridge drivers

Patches can build but no run-time testing.
So both test and review feedback appreciated!

Sam

Sam Ravnborg (5):
drm/bridge: tc358767: add detect bridge operation drm/bridge: tc358767: add get_edid bridge operation drm/bridge: tc358767: add drm_panel_bridge support drm/bridge: nxp-ptn3460: add get_edid bridge operation drm/bridge: nxp-ptn3460: add drm_panel_bridge support

 drivers/gpu/drm/bridge/nxp-ptn3460.c | 103 +++++++++++++---------------
 drivers/gpu/drm/bridge/tc358767.c    | 126 +++++++++++++++++++----------------
 2 files changed, 114 insertions(+), 115 deletions(-)

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel