irqchip: mstar: msc313 intc driver
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest3 patches 6 repliesIn review
Patches in v1 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/3 | dt: bindings: interrupt-controller: Add binding description for msc313-intcDocumentation/ MAINTAINERS | +80 | 3 replies | |
| 2/3 | irqchip: mstar: msc313-intc interrupt controller driverMAINTAINERS drivers/ drivers/ | +212 | 3 replies | |
| 3/3 | ARM: mstar: Add interrupt controller to base dtsiarch/ | +20 | 0 replies |
Reviews trailers per patch
None of the 3 patches has a Reviewed-by or Acked-by.
| Patch | Willy Tarreau |
|---|---|
| 1/3 | |
| 2/3 | T-b |
| 3/3 | T-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH 0/3] irqchip: mstar: msc313 intc driver
This driver adds support for the interrupt controllers present between the various IP blocks and the ARM GIC in MStar/SigmaStar Armv7 SoCs.
All of the chips so far have two instances of this controller.
One instance controls what are called "IRQ" interrupts by the vendor code I have seen.
The other instance controls what are called "FIQ" interrupts by the vendor code. Presumably because they can be FIQ interrupts. Right now the FIQ bypass is disabled in the GIC so they operate just the same as the IRQ interrupts.
The register layouts are the same for both. The FIQ one needs to have the status bit cleared on EOI so that difference is handled by a compatible string difference.
I initially made this an RFC because this is my first interrupt controller driver and I expect to have made a bunch of mistakes. I've cleaned this up a bit since then but I still expect it's not 100% correct. Especially the offset to map the INTC interrupt to the GIC interrupt.
Daniel Palmer (3):
dt: bindings: interrupt-controller: Add binding description for
msc313-intc
irqchip: mstar: msc313-intc interrupt controller driver
ARM: mstar: Add interrupt controller to base dtsi
.../mstar,msc313-intc.yaml | 79 +++++++ MAINTAINERS | 2 + arch/arm/boot/dts/mstar-v7.dtsi | 20 ++ drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-msc313-intc.c | 210 ++++++++++++++++++ 5 files changed, 312 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mstar,msc313-intc.yaml create mode 100644 drivers/irqchip/irq-msc313-intc.c
Signature · 7 lines
2.27.0 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel