Skip to content

Add C66x & C71x DSP nodes on J721E SoCs

Suman Anna linux-arm-kernel linux-devicetree 2 versions – Applied

Status from this message: I have applied the following to branch ti-k3-dts-next on [1].

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest8 patches 3 repliesApplied
  2. v17 patches 6 repliesSuperseded

Patches in v2 Applied

#Subject and filesSizeRepliesApplied
1/8arm64: dts: ti: k3-j721e-som-p0: Move mailbox nodes from board dts filearch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi+93 -930 replies
2/8arm64: dts: ti: k3-j721e-main: Add C66x DSP nodesarch/arm64/boot/dts/ti/k3-j721e-main.dtsi+26 -00 replies
3/8arm64: dts: ti: k3-j721e-som-p0: Add mailboxes to C66x DSPsarch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi+8 -00 replies
4/8arm64: dts: ti: k3-j721e-som-p0: Add DDR carveout memory nodes for C66 DSPsarch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi+28 -00 replies
5/8arm64: dts: ti: k3-j721e-main: Add C71x DSP nodearch/arm64/boot/dts/ti/k3-j721e-main.dtsi+12 -00 replies
6/8arm64: dts: ti: k3-j721e-som-p0: Add mailboxes to C71x DSParch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi+4 -00 replies
7/8arm64: dts: ti: k3-j721e-som-p0: Add DDR carveout memory nodes for C71x DSParch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi+14 -00 replies
8/8arm64: dts: ti: k3-j721e-som-p0: Reserve memory for IPC between RTOS coresarch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi+6 -00 replies

Reviews trailers per patch

None of the 8 patches has a Reviewed-by or Acked-by of their own; the series has one for all of them.

PatchLokesh Vutla
SeriesR-b
1/8
2/8
3/8
4/8
5/8
6/8
7/8
8/8

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [PATCH v2 0/8] Add C66x & C71x DSP nodes on J721E SoCs

Hi Nishanth,

The following is a revised version of the series [1] that adds the base dt nodes for the 2 C66x and 1 C71x DSP remote processors present in MAIN domain on J721E SoCs, and the required nodes to boot these successfully on J721E EVM board. It addresses the cleanup comments from you.

The patches are based on top of the pending ABI 3.0 pull-request [2] and I have used your temporary staging branch [3] as the baseline.

Main changes in v2:
- Patch 1 is new, and moves all the mailbox dts nodes from the common board dts file to the k3-j721e-som-p0.dtsi file
- Patches 3 & 6 are reworked to add the mboxes properties directly in the k3-j721e-som-p0.dtsi file
- Patches 4 & 8 are rebased versions to sit on top of the modified mailbox addition patches
- Patches 2, 5 and 8 are unchanged

regards
Suman

[1] https://patchwork.kernel.org/cover/11725347/
[2] https://lore.kernel.org/patchwork/patch/1295019/
[3] https://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux.git/log/?h=ti-k3-dts-stage

Suman Anna (8):
arm64: dts: ti: k3-j721e-som-p0: Move mailbox nodes from board dts
file
arm64: dts: ti: k3-j721e-main: Add C66x DSP nodes
arm64: dts: ti: k3-j721e-som-p0: Add mailboxes to C66x DSPs
arm64: dts: ti: k3-j721e-som-p0: Add DDR carveout memory nodes for C66
DSPs
arm64: dts: ti: k3-j721e-main: Add C71x DSP node
arm64: dts: ti: k3-j721e-som-p0: Add mailboxes to C71x DSP
arm64: dts: ti: k3-j721e-som-p0: Add DDR carveout memory nodes for
C71x DSP
arm64: dts: ti: k3-j721e-som-p0: Reserve memory for IPC between RTOS
cores

 .../dts/ti/k3-j721e-common-proc-board.dts     |  93 -----------
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     |  38 +++++
 arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi   | 153 ++++++++++++++++++
 3 files changed, 191 insertions(+), 93 deletions(-)
Signature · 1 line
2.28.0