Skip to content

dmaengine: Add support for QCOM GSI dma controller

Vinod Koul dmaengine linux-arm-msm linux-devicetree lkml 6 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v6 Latest3 patches 1 replyIn review
  2. v53 patches 1 replySuperseded
  3. v43 patches 11 repliesSuperseded
Earlier versions · 3
VersionPostedPatchesRepliesStatus
v33 patches8 repliesSuperseded
v23 patches0 repliesSuperseded
v13 patches11 repliesSuperseded

Changes in v6 from the cover letter

- Fix error reported by dt tool

Patches in v6 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3dt-bindings: dmaengine: Document qcom,gpi dma bindingDocumentation/devicetree/bindings/dma/qcom,gpi.yaml include/dt-bindings/dma/qcom-gpi.h+99 -00 replies
2/3dmaengine: add peripheral configurationinclude/linux/dmaengine.h+5 -00 replies
3/3dmaengine: qcom: Add GPI dma driverdrivers/dma/qcom/Kconfig drivers/dma/qcom/Makefile drivers/dma/qcom/gpi.c +1 more+2399 -01 reply

Reviews trailers per patch

1 of 3 patches has a Reviewed-by or Acked-by.

PatchRob Herring
1/3R-b
2/3
3/3

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v6 thread

Cover letter [PATCH v6 0/3] dmaengine: Add support for QCOM GSI dma controller

This series adds support for Qcom GSI dma controller found on Qualcomm SoCs. This controller can program the peripheral configuration so we add additional parameters in dma_slave_config for configuring the peripherals like spi and i2c.

Changes in v6:
- Fix error reported by dt tool

Changes in v5:
- Add acked by Rob
- Move qcom-gpi-dma.h header to include/linux/dma/
- rebase and test on v5.10-rc2

Changes in v3:
- Update the i2c tre creation based on testing feedback

Changes in v2:
- Update the binding and drop qcom specific properties
- Move peripheral configuration as a pointer
- Move submit queue for transactions to issue_pending

Vinod Koul (3):
dt-bindings: dmaengine: Document qcom,gpi dma binding
dmaengine: add peripheral configuration
dmaengine: qcom: Add GPI dma driver

 .../devicetree/bindings/dma/qcom,gpi.yaml     |   88 +
 drivers/dma/qcom/Kconfig                      |   12 +
 drivers/dma/qcom/Makefile                     |    1 +
 drivers/dma/qcom/gpi.c                        | 2303 +++++++++++++++++
 include/dt-bindings/dma/qcom-gpi.h            |   11 +
 include/linux/dma/qcom-gpi-dma.h              |   83 +
 include/linux/dmaengine.h                     |    5 +
 7 files changed, 2503 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/dma/qcom,gpi.yaml
 create mode 100644 drivers/dma/qcom/gpi.c
 create mode 100644 include/dt-bindings/dma/qcom-gpi.h
 create mode 100644 include/linux/dma/qcom-gpi-dma.h
Signature · 1 line
2.26.2