Skip to content

Add support for MMC/SD on j7200-evm

Faiz Abbas linux-arm-kernel linux-devicetree lkml 2 versions – Applied

Status from this message: I have applied the following to branch ti-k3-dts-next on [1].

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest2 patches 3 repliesApplied
  2. v12 patches 0 repliesSuperseded

Changes in v2 from the cover letter

Fixed node names to use mmc@* format
Fixed reg address format to align with others in the file

Patches in v2 Applied

#Subject and filesSizeRepliesApplied
1/2arm64: dts: ti: k3-j7200-main: Add support for MMC/SD controller nodesarch/arm64/boot/dts/ti/k3-j7200-main.dtsi+37 -00 replies
2/2arm64: dts: ti: k3-j7200-common-proc-board: Add support for eMMC and SD cardarch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts+28 -00 replies

Reviews trailers per patch

None of the 2 patches has a Reviewed-by or Acked-by of their own; the series has one for all of them.

PatchSekhar NoriVignesh Raghavendra
SeriesR-b T-b
1/2
2/2

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [PATCH v2 0/2] Add support for MMC/SD on j7200-evm

The following patches add dt support for MMC/SD on TI's j7200-evm.

Currently, eMMC support upto HS200 speed and SD card supports upto high speed speed mode.

v2:
Fixed node names to use mmc@* format
Fixed reg address format to align with others in the file

Faiz Abbas (2):
arm64: dts: ti: k3-j7200-main: Add support for MMC/SD controller nodes
arm64: dts: ti: k3-j7200-common-proc-board: Add support for eMMC and
SD card

 .../dts/ti/k3-j7200-common-proc-board.dts     | 28 ++++++++++++++
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi     | 37 +++++++++++++++++++
 2 files changed, 65 insertions(+)
Signature · 1 line
2.17.1