Skip to content

ptp_qoriq: support FIPER3

Yangbo Lu netdev 2 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest2 patches 1 replyIn review
  2. v12 patches 4 repliesSuperseded

Changes in v2 from the cover letter

- Some improvement in code.
- Added ACK from Vladimir.

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2dt-binding: ptp_qoriq: support fsl,tmr-fiper3 propertyDocumentation/devicetree/bindings/ptp/ptp-qoriq.txt+2 -00 replies
2/2ptp_qoriq: support FIPER3drivers/ptp/ptp_qoriq.c include/linux/fsl/ptp_qoriq.h+22 -10 replies

Reviews trailers per patch

1 of 2 patches has a Reviewed-by or Acked-by.

PatchVladimir Oltean
1/2
2/2A-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [v2, 0/2] ptp_qoriq: support FIPER3

The FIPER3 (fixed interval period pulse generator) is supported on DPAA2 and ENETC network controller hardware. This patch-set is to support it in ptp_qoriq driver and dt-binding.

Changes for v2:
- Some improvement in code.
- Added ACK from Vladimir.

Yangbo Lu (2):
dt-binding: ptp_qoriq: support fsl,tmr-fiper3 property
ptp_qoriq: support FIPER3

 Documentation/devicetree/bindings/ptp/ptp-qoriq.txt |  2 ++
 drivers/ptp/ptp_qoriq.c                             | 20 +++++++++++++++++++-
 include/linux/fsl/ptp_qoriq.h                       |  3 +++
 3 files changed, 24 insertions(+), 1 deletion(-)
Signature · 1 line
2.7.4