Skip to content

Adding 100base FX support

Dan Murphy netdev 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest1 patch 1 replyIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/1ethtool: Add 100BaseFX half and full duplex link modesethtool.c netlink/settings.c uapi/linux/ethtool.h+10 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/1] Adding 100base FX support

Hello

I am adding the 100base Fx support for the ethtool. There are a few PHYs that support the Fiber connection and the ethtool should be able to properly display that the PHY supports the 100base-FX Full and Half Duplex modes.

I am adding this support in the ethtool first and then submit the fiber bits into the kernel.

If the kernel needs to be updated first then I can prepare those patches and reference them.

Dan

Dan Murphy (1):
ethtool: Add 100BaseFX half and full duplex link modes

 ethtool.c            | 6 ++++++
 netlink/settings.c   | 2 ++
 uapi/linux/ethtool.h | 2 ++
 3 files changed, 10 insertions(+)
Signature · 1 line
2.28.0