Skip to content

sunxi: video: Add V3S simple-framebuffer

Martin Cerveny u-boot 2 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest5 patches 0 repliesNew
  2. v15 patches 0 repliesSuperseded

Changes in v2 from the cover letter

- problematic patch for generic DE2 suppress of doubleclock search was redesigned for V3s only
- changes dts(i) was synced from Linux-v5.9 and additional patch to enable simple-framebuffer

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5ARM: dts: sun8i: Update V3s dts(i) files from Linux-v5.9arch/arm/dts/sun8i-v3s-licheepi-zero.dts arch/arm/dts/sun8i-v3s.dtsi+196 -300 replies
2/5ARM: dts: sun8i: v3s: Add simple-framebufferarch/arm/dts/sun8i-v3s.dtsi+16 -01 reply
3/5pwm: sunxi: v3s: Enable PWM0arch/arm/include/asm/arch-sunxi/gpio.h drivers/pwm/sunxi_pwm.c+4 -00 replies
4/5sunxi: video: v3s: Enable LCD supportarch/arm/include/asm/arch-sunxi/clock_sun6i.h arch/arm/include/asm/arch-sunxi/gpio.h arch/arm/mach-sunxi/Kconfig +4 more+40 -83 replies
5/5sunxi: add drivers and configs needed for LCD displayconfigs/LicheePi_Zero_defconfig+4 -03 replies

Reviews trailers per patch

1 of 5 patches has a Reviewed-by or Acked-by.

PatchMaxime Ripard
1/5
2/5A-b
3/5
4/5
5/5

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [PATCH v2 0/5] sunxi: video: Add V3S simple-framebuffer

There are patches to enable "allwinner,simple-framebuffer" with "mixer0-lcd0" pipeline for V3s.

First patch updates V3s dts(i) from Linux-v5.9.
Second patch enable simple-framebuffer in V3s dtsi
(planed merge in Linux-v5.11)
Third patch enable PWM0 (for backlight support).
Fourth patch is the main extension to code and build:
- V3s has 2x VI and 1x UI channels (use UI channel), so use third channel.
- V3s uses PLL3 (PLL_VIDEO) for both DE2 and TCON0 pixelclock. PLL10 is used for DDR2. PLL3 does not support doubleclock.
- V3s supports resolution upto 1024x1024. Also scale down memory requirements for V3s (64MB embedded DDR2)
- V3s does not support HDMI.
Fifth patch enable PWM drivers and corrects CONFIG_VIDEO_LCD_DCLK_PHASE.

Tested with "Lichee Zero" V3s and 800x600 LCD (not configured DRM DE2/TCON0/panel in linux DTS). To enable functionality see TESTING patch at
- https://github.com/mcerveny/u-boot/tree/simplefb_v3s_v2

Changes since v1:
- problematic patch for generic DE2 suppress of doubleclock search was redesigned for V3s only
- changes dts(i) was synced from Linux-v5.9 and additional patch to enable simple-framebuffer

Martin Cerveny (5):
ARM: dts: sun8i: Update V3s dts(i) files from Linux-v5.9
ARM: dts: sun8i: v3s: Add simple-framebuffer
pwm: sunxi: v3s: Enable PWM0
sunxi: video: v3s: Enable LCD support
sunxi: add drivers and configs needed for LCD display

 arch/arm/dts/sun8i-v3s-licheepi-zero.dts      |  26 ++-
 arch/arm/dts/sun8i-v3s.dtsi                   | 216 +++++++++++++++---
 arch/arm/include/asm/arch-sunxi/clock_sun6i.h |   5 +-
 arch/arm/include/asm/arch-sunxi/gpio.h        |   2 +
 arch/arm/mach-sunxi/Kconfig                   |   1 +
 configs/LicheePi_Zero_defconfig               |   4 +
 drivers/pwm/sunxi_pwm.c                       |   3 +
 drivers/video/sunxi/lcdc.c                    |   5 +-
 drivers/video/sunxi/sunxi_de2.c               |  25 +-
 drivers/video/sunxi/sunxi_dw_hdmi.c           |   2 +
 drivers/video/sunxi/sunxi_lcd.c               |   9 +-
 11 files changed, 260 insertions(+), 38 deletions(-)
Signature · 1 line
2.25.1