Skip to content

Buildroot support for Chromebook Elm

Bilal Wasim buildroot 2 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest2 patches 0 repliesNew
  2. v13 patches 0 repliesSuperseded

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2board/chromebook: Add support of Chromebook Elmboard/chromebook/elm/kernel.args board/chromebook/elm/kernel.its board/chromebook/elm/linux.config +8 more+964 -00 replies
2/2DEVELOPERS: add myself as contact for chromebook elmDEVELOPERS+4 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [Buildroot] [PATCH v2 0/2] Buildroot support for Chromebook Elm

This patch series adds supports for generating Buildroot kernel + rootfs images for the Arm Elm Chromebook
(https://www.acer.com/ac/en/US/content/series/acerchromebookr13).

A board is added under board/chromebook which provides infrastructure necessary to generate images. For example, the kernel.its file helps to generate FIT image while the kernel.args file lists all the necessary kernel command line params. Both of these files are used to generate a signed kernel image by the sign.sh file. This folder also contains a patch which must be applied to the linux kernel to get the HDMI working. This patch is lying in "drm-misc-next" and should make it to the mainline by 5.10, at which point it should be removed from buildroot and kernel up-reved to 5.10 assuming nothing else fails. We also add a configuration necessary to build the kernel.

In addition, a defconfig for Elm chromebook is added to make life easy for the user. To generate kernel+rootfs, the user only needs to do
make chromebook_elm_defconfig
make menuconfig # If changes are required
make -j ${nproc}

All of this is briefly mentioned in the readme file under the elm board file.

The following changes have been made specifically in v2,
-> Added myself in the DEVELOPERS file for chromebook elm -> Created seperate patches instead of a single consolidated patch. -> Moved these patches to a seperate folder to keep top-level clean. -> Made sign.sh executable.
-> Fixed other misc issues reported in v1.

Bilal Wasim (2):
board/chromebook: Add support of Chromebook Elm
DEVELOPERS: add myself as contact for chromebook elm

 DEVELOPERS                                    |   4 +
 board/chromebook/elm/kernel.args              |   1 +
 board/chromebook/elm/kernel.its               |  38 ++
 board/chromebook/elm/linux.config             | 453 ++++++++++++++++++
 ...ctor-Set-default-status-connected-fo.patch |  35 ++
 ...ps8640-Get-the-EDID-from-eDP-control.patch |  50 ++
 ...0-Return-an-error-for-incorrect-atta.patch |  35 ++
 ...0-Print-an-error-if-VDO-control-fail.patch |  58 +++
 ...e-ps8640-Rework-power-state-handling.patch | 162 +++++++
 board/chromebook/elm/readme.txt               |  56 +++
 board/chromebook/elm/sign.sh                  |  41 ++
 configs/chromebook_elm_defconfig              |  35 ++
 12 files changed, 968 insertions(+)
 create mode 100644 board/chromebook/elm/kernel.args
 create mode 100644 board/chromebook/elm/kernel.its
 create mode 100644 board/chromebook/elm/linux.config
 create mode 100644 board/chromebook/elm/patches/0001-drm-bridge_connector-Set-default-status-connected-fo.patch
 create mode 100644 board/chromebook/elm/patches/0002-drm-bridge-ps8640-Get-the-EDID-from-eDP-control.patch
 create mode 100644 board/chromebook/elm/patches/0003-drm-bridge-ps8640-Return-an-error-for-incorrect-atta.patch
 create mode 100644 board/chromebook/elm/patches/0004-drm-bridge-ps8640-Print-an-error-if-VDO-control-fail.patch
 create mode 100644 board/chromebook/elm/patches/0005-drm-bridge-ps8640-Rework-power-state-handling.patch
 create mode 100644 board/chromebook/elm/readme.txt
 create mode 100755 board/chromebook/elm/sign.sh
 create mode 100644 configs/chromebook_elm_defconfig
Signature · 1 line
2.25.1