DP83TD510 Single Pair 10Mbps Ethernet PHY
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v4 Latest4 patches 7 repliesIn review
- v34 patches 19 repliesSuperseded
- v23 patches 3 repliesSuperseded
Earlier versions · 1
| Version | Posted | Patches | Replies | Status |
|---|---|---|---|---|
| v1 | 2 patches | 10 replies | Superseded |
Patches in v4 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/4 | ethtool: Add 10base-T1L link mode entriesdrivers/ include/ net/ +1 more | +9 | 0 replies | |
| 2/4 | dt-bindings: net: Add Rx/Tx output configuration for 10base T1LDocumentation/ | +6 | 3 replies | |
| 3/4 | dt-bindings: dp83td510: Add binding for DP83TD510 Ethernet PHYDocumentation/ | +64 | 1 reply | |
| 4/4 | net: phy: dp83td510: Add support for the DP83TD510 Ethernet PHYdrivers/ drivers/ drivers/ | +512 | 3 replies |
Reviews trailers per patch
1 of 4 patches has a Reviewed-by or Acked-by.
| Patch | Andrew Lunn | Florian Fainelli |
|---|---|---|
| 1/4 | R-b | R-b |
| 2/4 | ||
| 3/4 | ||
| 4/4 |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH net-next v4 0/4] DP83TD510 Single Pair 10Mbps Ethernet PHY
Hello
The DP83TD510 is an Ethernet PHY supporting single pair of twisted wires. The PHY is capable of 10Mbps communication over long distances and exceeds the IEEE 802.3cg 10BASE-T1L single-pair Ethernet specification. The PHY supports various voltage level signalling and can be forced to support a specific voltage or allowed to perfrom auto negotiation on the voltage level. The default for the PHY is auto negotiation but if the PHY is forced to a specific voltage then the LP must also support the same voltage.
Add the 10BASE-T1L linkmodes for ethtool to properly advertise the PHY's capability.
Dan
Dan Murphy (4):
ethtool: Add 10base-T1L link mode entries
dt-bindings: net: Add Rx/Tx output configuration for 10base T1L
dt-bindings: dp83td510: Add binding for DP83TD510 Ethernet PHY
net: phy: dp83td510: Add support for the DP83TD510 Ethernet PHY
.../devicetree/bindings/net/ethernet-phy.yaml | 6 + .../devicetree/bindings/net/ti,dp83td510.yaml | 64 +++ drivers/net/phy/Kconfig | 6 + drivers/net/phy/Makefile | 1 + drivers/net/phy/dp83td510.c | 505 ++++++++++++++++++ drivers/net/phy/phy-core.c | 4 +- include/uapi/linux/ethtool.h | 2 + net/ethtool/common.c | 2 + net/ethtool/linkmodes.c | 2 + 9 files changed, 591 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/net/ti,dp83td510.yaml create mode 100644 drivers/net/phy/dp83td510.c
Signature · 1 line
2.29.2