Skip to content

Make driver compatible with ast2600

Billy Tsai linux-arm-kernel linux-aspeed linux-devicetree linux-iio lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 5 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3iio: adc: aspeed: Orgnaize and add the define of adcdrivers/iio/adc/aspeed_adc.c+38 -42 replies
2/3iio: adc: aspeed: Modify driver for ast2600drivers/iio/adc/aspeed_adc.c+95 -341 reply
3/3iio: adc: aspeed: Setting ref_voltage in probeDocumentation/devicetree/bindings/iio/adc/aspeed_adc.txt+15 -12 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/3] Make driver compatible with ast2600

The ast2600 is a new generation of SoC from ASPEED.
The adc device in this generation adds some changes and features. This patch series handles the changes below:
1. Define the new register fields.
2. Split into two individual IPs and each contains 8 voltage channels.
3. Remove the pre-scaler and extend the field length of the scaler.
4. Ref_voltage becomes configurable.

Billy Tsai (3):
iio: adc: aspeed: Orgnaize and add the define of adc
iio: adc: aspeed: Make driver compatible with ast2600
iio: adc: aspeed: Setting ref_voltage in probe

 .../bindings/iio/adc/aspeed_adc.txt           |  16 +-
 drivers/iio/adc/aspeed_adc.c                  | 168 ++++++++++++++----
 2 files changed, 148 insertions(+), 36 deletions(-)
Signature · 1 line
2.17.1