Skip to content

Link frequency helper for receivers

Sakari Ailus linux-media oe-kbuild-all 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2v4l: Add a helper for obtaining the link frequencydrivers/media/v4l2-core/v4l2-common.c include/media/v4l2-common.h+54 -00 replies
2/2ipu3-cio2: Use v4l2_get_link_freq helperdrivers/media/pci/intel/ipu3/ipu3-cio2.c+12 -213 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] Link frequency helper for receivers

Hi folks,

Here's a small helper for getting the link frequency from the transmitter drivers. Besides being easy to use, it allows receiver drivers to work with old sensor drivers implementing just V4L2_CID_PIXEL_RATE control but not V4L2_CID_LINK_FREQ control. Using V4L2_CID_PIXEL_RATE is supported on parallel and CSI-2 D-PHY busses.

Sakari Ailus (2):
v4l: Add a helper for obtaining the link frequency
ipu3-cio2: Use v4l2_get_link_freq helper

 drivers/media/pci/intel/ipu3/ipu3-cio2.c | 33 +++++++++---------------
 drivers/media/v4l2-core/v4l2-common.c    | 33 ++++++++++++++++++++++++
 include/media/v4l2-common.h              | 21 +++++++++++++++
 3 files changed, 66 insertions(+), 21 deletions(-)
Signature · 1 line
2.27.0