Skip to content

Add support for Rpi4b + Cirrus Lochnagar2 and CS47L15

Richard Fitzgerald alsa-devel linux-arm-kernel linux-devicetree lkml 4 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v4 Latest6 patches 15 repliesIn review
  2. v36 patches 4 repliesSuperseded
  3. v27 patches 4 repliesSuperseded
Earlier versions · 1
VersionPostedPatchesRepliesStatus
v17 patches14 repliesSuperseded

Patches in v4 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/6of: base: Add of_count_phandle_with_fixed_args()drivers/of/base.c include/linux/of.h+59 -230 replies
2/6dt-bindings: audio-graph-card: Add plls and sysclks propertiesDocumentation/devicetree/bindings/sound/audio-graph.yaml+46 -011 replies
3/6ASoC: audio-graph-card: Support setting component plls and sysclksinclude/sound/simple_card_utils.h sound/soc/generic/audio-graph-card.c sound/soc/generic/simple-card-utils.c+276 -04 replies
4/6ASoC: madera: Allow codecs to be selected from kernel configsound/soc/codecs/Kconfig+5 -50 replies
5/6ASoC: madera: Export clock config defines to dt-bindingsinclude/dt-bindings/sound/madera.h sound/soc/codecs/madera.h+61 -550 replies
6/6ARM: dts: Add dts for RPi4b + Cirrus Logic Lochnagar2 + CS47L15MAINTAINERS arch/arm/boot/dts/Makefile arch/arm/boot/dts/bcm2711-rpi-4-b-lochnagar-cs47l15.dts +1 more+389 -00 replies

Reviews trailers per patch

1 of 6 patches has a Reviewed-by or Acked-by.

PatchRob Herring
1/6R-b
2/6
3/6
4/6
5/6
6/6

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v4 thread

Cover letter [PATCH v4 0/6] Add support for Rpi4b + Cirrus Lochnagar2 and CS47L15

This set of patches provides support for using the Raspberry Pi 4b with a Cirrus Logic Lochnagar 2 audio development platform plus Cirrus Logic CS47L15 codec.

Patches are needed to audio-graph-card to enable support for setting the component sysclks and plls. These are not specific to CS47L15 - several Cirrus and non-Cirrus codecs also require component clock setup, typically for larger codecs with multiple internal clocking options and clock domains.

The codec sysclks and plls cannot be placed under the clock framework because they are typically I2C/SPI/Soundwire-connected peripherals and access to the registers would cause a nested get of the bus clock. The clock framework does not support this and it would result in a deadlock.

Richard Fitzgerald (6):
of: base: Add of_count_phandle_with_fixed_args()
dt-bindings: audio-graph-card: Add plls and sysclks properties
ASoC: audio-graph-card: Support setting component plls and sysclks
ASoC: madera: Allow codecs to be selected from kernel config
ASoC: madera: Export clock config defines to dt-bindings
ARM: dts: Add dts for RPi4b + Cirrus Logic Lochnagar2 + CS47L15

 .../bindings/sound/audio-graph.yaml           |  46 ++++
 MAINTAINERS                                   |   1 +
 arch/arm/boot/dts/Makefile                    |   1 +
 .../dts/bcm2711-rpi-4-b-lochnagar-cs47l15.dts | 186 ++++++++++++++
 .../boot/dts/bcm2711-rpi-4-b-lochnagar.dtsi   | 201 +++++++++++++++
 drivers/of/base.c                             |  73 ++++--
 include/dt-bindings/sound/madera.h            |  60 +++++
 include/linux/of.h                            |   9 +
 include/sound/simple_card_utils.h             |  25 ++
 sound/soc/codecs/Kconfig                      |  10 +-
 sound/soc/codecs/madera.h                     |  56 +----
 sound/soc/generic/audio-graph-card.c          |  13 +
 sound/soc/generic/simple-card-utils.c         | 238 ++++++++++++++++++
 13 files changed, 836 insertions(+), 83 deletions(-)
 create mode 100644 arch/arm/boot/dts/bcm2711-rpi-4-b-lochnagar-cs47l15.dts
 create mode 100644 arch/arm/boot/dts/bcm2711-rpi-4-b-lochnagar.dtsi
Signature · 1 line
2.20.1