Skip to content

Add R5F nodes on TI K3 AM65x and J721E SoCs

Suman Anna linux-arm-kernel linux-devicetree 1 version Applied

Status from this message: I have applied the following to branch ti-k3-dts-next on [1].

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest8 patches 4 repliesApplied

Patches in v1 Applied

#Subject and filesSizeRepliesApplied
1/8arm64: dts: ti: k3-am65-mcu: Add MCU domain R5F cluster nodearch/arm64/boot/dts/ti/k3-am65-mcu.dtsi+41 -10 replies
2/8arm64: dts: ti: k3-am654-base-board: Add mailboxes to R5Fsarch/arm64/boot/dts/ti/k3-am654-base-board.dts+9 -10 replies
3/8arm64: dts: ti: k3-am654-base-board: Add DDR carveout memory nodes for R5Fsarch/arm64/boot/dts/ti/k3-am654-base-board.dts+29 -00 replies
4/8arm64: dts: ti: k3-am654-base-board: Reserve memory for IPC between R5F coresarch/arm64/boot/dts/ti/k3-am654-base-board.dts+6 -00 replies
5/8arm64: dts: ti: k3-j721e-mcu: Add MCU domain R5F cluster nodearch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi+41 -10 replies
6/8arm64: dts: ti: k3-j721e-main: Add MAIN domain R5F cluster nodesarch/arm64/boot/dts/ti/k3-j721e-main.dtsi+81 -10 replies
7/8arm64: dts: ti: k3-j721e-som-p0: Add mailboxes to R5Fsarch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi+25 -10 replies
8/8arm64: dts: ti: k3-j721e-som-p0: Add DDR carveout memory nodes for R5Fsarch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi+84 -00 replies

Reviews trailers per patch

None of the 8 patches has a Reviewed-by or Acked-by of their own; the series has one for all of them.

PatchLokesh Vutla
SeriesR-b
1/8
2/8
3/8
4/8
5/8
6/8
7/8
8/8

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/8] Add R5F nodes on TI K3 AM65x and J721E SoCs

Hi Nishanth,

The TI K3 R5F remoteproc driver and bindings were merged into 5.10-rc1, and this series adds the follow-on base dt nodes for the R5F remote processors on TI K3 AM65x and J721E SoCs. Additional memory nodes were also added to boot these processors successfully on applicable TI K3 AM65x and J721E EVM boards. The series uses previously accepted mailbox nodes.

The patches follow slightly different convention between AM65x and J721E. The reserved-memory nodes are added directly in the relevant board dts file for AM65x boards, while they are added in the common k3-j721e-som-p0.dtsi file for J721E SoCs following the similar addition of K3 C66x and C71x DSP nodes in 5.10-rc1.

Patches apply on top of your 5.10-rc1 based staging branch.

I have validated the IPC functionality using System Firmware v2020.04a and corresponding IPC example firmwares.

regards
Suman

Suman Anna (8):
arm64: dts: ti: k3-am65-mcu: Add MCU domain R5F cluster node
arm64: dts: ti: k3-am654-base-board: Add mailboxes to R5Fs
arm64: dts: ti: k3-am654-base-board: Add DDR carveout memory nodes for
R5Fs
arm64: dts: ti: k3-am654-base-board: Reserve memory for IPC between
R5F cores
arm64: dts: ti: k3-j721e-mcu: Add MCU domain R5F cluster node
arm64: dts: ti: k3-j721e-main: Add MAIN domain R5F cluster nodes
arm64: dts: ti: k3-j721e-som-p0: Add mailboxes to R5Fs
arm64: dts: ti: k3-j721e-som-p0: Add DDR carveout memory nodes for
R5Fs

 arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi       |  42 ++++++-
 .../arm64/boot/dts/ti/k3-am654-base-board.dts |  45 ++++++-
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     |  82 ++++++++++++-
 .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi      |  42 ++++++-
 arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi   | 110 +++++++++++++++++-
 5 files changed, 316 insertions(+), 5 deletions(-)
Signature · 7 lines
2.28.0


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel