Skip to content

ARM: dts: sun8i: h3: Add initial NanoPi R1 support

Yu-Tung Chang linux-arm-kernel linux-devicetree lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest1 patch 6 repliesIn review

Changes in v1 from the cover letter

- use SPDX header
- rename led node to led-[0-9]
- rename sdio-wifi node to wifi
- use "function" and "color" properties for led node
- modify usb_otg->dr_mode property to otg
- add aliases for uart1, emac, wifi

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/1ARM: dts: sun8i: h3: Add initial NanoPi R1 supportDocumentation/devicetree/bindings/arm/sunxi.yaml arch/arm/boot/dts/Makefile arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts+175 -06 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH v1 0/1] ARM: dts: sun8i: h3: Add initial NanoPi R1 support

This patch add FriendlyArm NanoPi R1 support.

Wiki:
http://wiki.friendlyarm.com/wiki/index.php/NanoPi_R1

Schematic:
http://wiki.friendlyarm.com/wiki/images/a/ab/NanoPi_R1_V1.0_1809-Schematic.pdf

v1:
- use SPDX header
- rename led node to led-[0-9]
- rename sdio-wifi node to wifi
- use "function" and "color" properties for led node
- modify usb_otg->dr_mode property to otg
- add aliases for uart1, emac, wifi

Yu-Tung Chang (1):
ARM: dts: sun8i: h3: Add initial NanoPi R1 support

 .../devicetree/bindings/arm/sunxi.yaml        |   5 +
 arch/arm/boot/dts/Makefile                    |   1 +
 arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts      | 169 ++++++++++++++++++
 3 files changed, 175 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
Signature · 1 line
2.29.0