Skip to content

Add gpio support for TI's J7200 platform

Faiz Abbas linux-arm-kernel linux-devicetree lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 9 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3arm64: dts: ti: k3-j7200-main: Add gpio nodes in main domainarch/arm64/boot/dts/ti/k3-j7200-main.dtsi+68 -07 replies
2/3arm64: dts: ti: k3-j7200: Add gpio nodes in wakeup domainarch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi+32 -00 replies
3/3arm64: dts: ti: k3-j7200-common-proc-board: Disable unused gpio modulesarch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts+16 -00 replies

Reviews trailers per patch

None of the 3 patches has a Reviewed-by or Acked-by of their own; the series has one for all of them.

PatchLokesh Vutla
SeriesR-b
1/3
2/3
3/3

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/3] Add gpio support for TI's J7200 platform

The following patches add gpio support for TI's J7200 platform.

These patches were posted as a part of an older series but have now been split into three parts. The 3 parts add configs, gpios and MMC/SD related dts patches respectively.

Older series is here:
https://lore.kernel.org/linux-arm-kernel/[email protected]/

Series adding configs to arm64 defconfig is here:
https://lore.kernel.org/linux-arm-kernel/[email protected]/

Faiz Abbas (3):
arm64: dts: ti: k3-j7200-main: Add gpio nodes in main domain
arm64: dts: ti: k3-j7200: Add gpio nodes in wakeup domain
arm64: dts: ti: k3-j7200-common-proc-board: Disable unused gpio
modules

 .../dts/ti/k3-j7200-common-proc-board.dts     | 16 +++++
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi     | 68 +++++++++++++++++++
 .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi      | 32 +++++++++
 3 files changed, 116 insertions(+)
Signature · 1 line
2.17.1