imx: support for conga-QMX8 board
Get series with b4
b4 am 20201104154438.GC23897@optiplexVersions newest first
- v3 Latest0 of 2 patches 0 repliesNew
Patches in v3 No applies recorded yet
None of the 2 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.
Cover letter [PATCH v3 0/2] imx: support for conga-QMX8 board
Quoted 41 lines · Oliver Graute
Second patch is still needed for booting. Tipps to get rid of that patch would be helpfull.
Between u-boot-imx-20200511 and u-boot-imx-20200609 something more is broken, I run into this issue:
U-Boot 2020.07-rc3-00002-gbf3f929aa6 (Jun 16 2020 - 14:36:58 +0200)
CPU: NXP i.MX8QM RevB A53 at 1200 MHz
Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d7523fe8, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiBDevice 'gpio at
5d090000': seq 0 is in use by 'gpio at5d080000' Device 'gpio at5d0a0000': seq 1 is in use by 'gpio at5d090000'
MMC:FSL_SDHC: 0,FSL_SDHC: 1,FSL_SDHC: 2
Loading Environment from MMC... OKIn: serial at 5a060000 Out: serial at 5a060000 Err: serial at 5a060000"Synchronous Abort" handler, esr
0x96000004
elr:000000008005cf48lr :0000000080022f94(reloc)
elr:00000000fff22f48lr :00000000ffee8f94x0 :fffffffffdaf3540x1 :00000000fff2d8a0x2 : 0000000000000000 x3 : 0000000000000000 x4 : 0000000000000000 x5 :fffffffffdaf3540x6 :00000000fff068a8x7 :00000000fff3bca0x8 :00000000fdaf3ac0x9 : 0000000000000008
x10:00000000fdaecb30x11:00000000fdaefdd0
x12: 0000000000000000 x13: 0000000000000200
x14:00000000fdadebf8x15:00000000ffffffff
x16: 0000000000001080 x17: 0000000000000000
x18:00000000fdae4da0x19: 0000000000000002
x20:00000000fff3b000x21:000000007fec6000
x22: 0000000000000000 x23: 0000000000000000
x24: 0000000000000000 x25: 0000000000000000
x26: 0000000000000000 x27: 0000000000000000
x28: 0000000000000000 x29:00000000fdadfd90
Quoted 4 lines
Code: aa0503e4 17fffff2 aa0003e5 d2800003 (386368a4)Resetting CPU ...
resetting ...
Currently I try to rebase this patch to v2020.10. But still run into crashes. After some fun with bisect I could blame this commit:
commit 09140113108541b95d340f3c7b6ee597d31ccc73
Author: Simon Glass <[email protected]> Date: Sun May 10 11:40:03 2020 -0600
command: Remove the cmd_tbl_t typedef
09140113108541b95d340f3c7b6ee597d31ccc73 BAD 691d719db7183dfb1d1360efed4c5e9f6899095f GOOD
But I assume that I need to fix something on my patch. Perhaps someone could comment and help me on this.
Best regards,
Oliver
U-Boot 2020.07-rc2-00147-g17a341f285 (Nov 04 2020 - 16:13:36 +0100)
sc_pm_get_clock_rate: resource:507 clk:2: res:3 Could not read CPU frequency: -22
CPU: NXP i.MX8QM RevB A35 at 0 MHz
Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d7523fe8, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB
Device 'gpio at 5d090000': seq 0 is in use by 'gpio at 5d080000' Device 'gpio at 5d0a0000': seq 1 is in use by 'gpio at 5d090000'
MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... *** Warning - bad CRC, using default environment
In: serial at 5a060000 Out: serial at 5a060000 Err: serial at 5a060000
"Synchronous Abort" handler, esr 0x96000004
elr: 000000008005cf54 lr : 0000000080022f94 (reloc)
elr: 00000000fff22f54 lr : 00000000ffee8f94 x0 : fffffffffdaf0e40 x1 : 00000000fff2d89f x2 : 0000000000000000 x3 : 0000000000000000 x4 : 0000000000000000 x5 : fffffffffdaf0e40 x6 : 00000000fff068f4 x7 : 00000000fff3bca0 x8 : 00000000fdaf1390 x9 : 0000000000000008
x10: 00000000fdaec9a0 x11: 00000000fdaee528
x12: 0000000000000000 x13: 0000000000000200
x14: 00000000fdadebf8 x15: 00000000ffffffff
x16: 0000000000001080 x17: 0000000000000000
x18: 00000000fdae4da0 x19: 0000000000000002
x20: 00000000fff3b000 x21: 000000007fec6000
x22: 0000000000000000 x23: 0000000000000000
x24: 0000000000000000 x25: 0000000000000000
x26: 0000000000000000 x27: 0000000000000000
x28: 0000000000000000 x29: 00000000fdadfd90
Code: aa0503e4 17fffff2 aa0003e5 d2800003 (386368a4)
Resetting CPU ...
resetting ...