Skip to content

Turris Omnia device-tree changes

Marek Behún linux-arm-kernel linux-devicetree 3 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest7 patches 4 repliesIn review
  2. v26 patches 16 repliesSuperseded
  3. v16 patches 14 repliesSuperseded

Changes in v3 from the cover letter

- fixed typo in 2/7
- updated comment in 4/7 (describing current SFP cage binding status)
- changed commit message in 4/7 a little bit
- changed LED_FUNCTION_DEBUG to LED_FUNCTION_INDICATOR in 5/7
- updated comment about LED controller in 5/7
- added 7/7 which removes 2 unneeded status = "okay"

Patches in v3 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/7ARM: dts: turris-omnia: enable HW buffer managementarch/arm/boot/dts/armada-385-turris-omnia.dts+17 -00 replies
2/7ARM: dts: turris-omnia: add comphy handle to eth2arch/arm/boot/dts/armada-385-turris-omnia.dts+1 -00 replies
3/7ARM: dts: turris-omnia: describe switch interruptarch/arm/boot/dts/armada-385-turris-omnia.dts+11 -10 replies
4/7ARM: dts: turris-omnia: add SFP nodearch/arm/boot/dts/armada-385-turris-omnia.dts+28 -10 replies
4/7ARM: dts: turris-omnia: add SFP nodearch/arm/boot/dts/armada-385-turris-omnia.dts+29 -13 replies
5/7ARM: dts: turris-omnia: add LED controller nodearch/arm/boot/dts/armada-385-turris-omnia.dts+110 -10 replies
6/7ARM: dts: turris-omnia: update ethernet-phy node and handle namearch/arm/boot/dts/armada-385-turris-omnia.dts+3 -30 replies
7/7ARM: dts: turris-omnia: remove unneeded status = "okay" propertiesarch/arm/boot/dts/armada-385-turris-omnia.dts+0 -20 replies

Reviews trailers per patch

4 of 8 patches have a Reviewed-by or Acked-by.

PatchAndrew LunnAndreas Färber
1/7
2/7R-b R-b
3/7
4/7R-b R-b
4/7R-b R-b
5/7
6/7R-b
7/7

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v3 thread

Cover letter [PATCH mvebu-dt v3 0/7] Turris Omnia device-tree changes

Hi Gregory,

v3 of series with changes for Turris Omnia device tree.

Changes since v2 (mostly thanks to Andreas):
- fixed typo in 2/7
- updated comment in 4/7 (describing current SFP cage binding status)
- changed commit message in 4/7 a little bit
- changed LED_FUNCTION_DEBUG to LED_FUNCTION_INDICATOR in 5/7
- updated comment about LED controller in 5/7
- added 7/7 which removes 2 unneeded status = "okay"

Changes since v1:
- added patch which adds description for switch interrupt
- removed patch adding ethernet-phy interrupt: the PHY interrupt is asserted by level low, but the GPIO expander driver supports only edge rising/falling, and even then it may not be correct when an interrupt storm occurs. So keep polling the PHY
- added Andrew's Reviewed-by tags

Cc [email protected]
Cc Uwe Kleine-König <[email protected]>
Cc Jason Cooper <[email protected]>
Cc Gregory CLEMENT <[email protected]>
Cc Andreas Färber <[email protected]>
Cc Andrew Lunn <[email protected]>
Cc Rob Herring <[email protected]>
Cc [email protected]

Marek Behún (7):
ARM: dts: turris-omnia: enable HW buffer management
ARM: dts: turris-omnia: add comphy handle to eth2
ARM: dts: turris-omnia: describe switch interrupt
ARM: dts: turris-omnia: add SFP node
ARM: dts: turris-omnia: add LED controller node
ARM: dts: turris-omnia: update ethernet-phy node and handle name
ARM: dts: turris-omnia: remove unneeded status = "okay" properties

 arch/arm/boot/dts/armada-385-turris-omnia.dts | 178 +++++++++++++++++-
 1 file changed, 170 insertions(+), 8 deletions(-)
Signature · 1 line
2.26.2

Read the cover letter in its thread