Skip to content

add support for Dragonboard410c

Mike Frampton buildroot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v2 Latest3 patches 0 repliesNew

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3package/qcom-db410c-firmware: new packageDEVELOPERS package/Config.in package/qcom-db410c-firmware/Config.in +2 more+54 -02 replies
2/3package/abootimg: add host buildpackage/Config.in.host package/abootimg/Config.in.host package/abootimg/abootimg.mk+19 -01 reply
3/3configs/qcom_db410c: new defconfigDEVELOPERS board/qcom/db410c/post-image.sh board/qcom/db410c/readme.txt +1 more+143 -01 reply
3/3configs/qcom_db410c: new defconfig+0 -00 replies
3/3configs/qcom_db410c: new defconfiglinux/linux.mk+6 -11 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [Buildroot] [PATCH v2 0/3] add support for Dragonboard410c

Hi Buildroot devs,

This is my second attempt at submitting a config for the Qualcomm Dragonboard 410c. Thomas Petazzoni gave me some feedback on the last series which I have tried to address in this patch.

I have built an image using the defconfig below and tested that it boots on the DB410c. I also tested that the Wifi works.

Thomas suggested that I change the post-image.sh script so that it doesn't reference the kernel build path. I was not able to achieve this because my dtb and Image.gz were not copied to output/images. I found that only the uncompressed kernel image was copied by the kernel package, and I think my dts wasn't copied because I had BR2_LINUX_KERNEL_DTB_IS_SELF_BUILT=y. Is this expected behaviour?

Mike Frampton (3):
package/qcom-db410c-firmware: new package
package/abootimg: add host build
configs/qcom_db410c: new defconfig

 DEVELOPERS                                    |  5 +
 board/qcom/db410c/post-image.sh               | 20 ++++
 board/qcom/db410c/readme.txt                  | 93 +++++++++++++++++++
 configs/qcom_db410c_defconfig                 | 28 ++++++
 package/Config.in                             |  1 +
 package/Config.in.host                        |  1 +
 package/abootimg/Config.in.host               |  8 ++
 package/abootimg/abootimg.mk                  | 10 ++
 package/qcom-db410c-firmware/Config.in        |  6 ++
 .../qcom-db410c-firmware.hash                 |  3 +
 .../qcom-db410c-firmware.mk                   | 41 ++++++++
 11 files changed, 216 insertions(+)
 create mode 100755 board/qcom/db410c/post-image.sh
 create mode 100644 board/qcom/db410c/readme.txt
 create mode 100644 configs/qcom_db410c_defconfig
 create mode 100644 package/abootimg/Config.in.host
 create mode 100644 package/qcom-db410c-firmware/Config.in
 create mode 100644 package/qcom-db410c-firmware/qcom-db410c-firmware.hash
 create mode 100644 package/qcom-db410c-firmware/qcom-db410c-firmware.mk
Signature · 1 line
2.25.1