Skip to content

Use just one DTS file for all Espressobin variants

Pali Rohár u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest4 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/4Revert "arm64: dts: armada-3720-espressobin: split common parts to .dtsi"arch/arm/dts/armada-3720-espressobin.dts arch/arm/dts/armada-3720-espressobin.dtsi+157 -1740 replies
2/4Revert "arm64: dts: a3720: add support for espressobin with populated emmc"arch/arm/dts/Makefile arch/arm/dts/armada-3720-espressobin-emmc.dts doc/README.marvell+2 -500 replies
3/4arm: mvebu: Espressobin: Add support for emmc into dts filearch/arm/dts/armada-3720-espressobin.dts+22 -00 replies
4/4arm: mvebu: Espressobin: Detect presence of emmc at runtimeboard/Marvell/mvebu_armada-37xx/board.c+5 -11 reply
4/4arm: mvebu: Espressobin: Detect presence of emmc at runtime+0 -01 reply
4/4arm: mvebu: Espressobin: Detect presence of emmc at runtime+0 -01 reply

Reviews trailers per patch

3 of 6 patches have a Reviewed-by or Acked-by.

PatchG?rald KermaAndre Heider
1/4
2/4
3/4T-b
4/4T-b R-b
4/4T-b R-b
4/4T-b R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/4] Use just one DTS file for all Espressobin variants

This patch series change Espressobin code to use in U-Boot just one DTS file for all Espressobin variants. Therefore DT compatible string globalscale,espressobin-emmc is not used anymore as it is not needed.

It means that setup and compilation of U-Boot for Espressobin is less complicated and more simple. As there is no need to check for HW details and just one U-Boot binary would work for all Espressobin variants.

First two patches just revert previous eMMC support and next two patches add support for eMMC in way that just one DTS file is used and fdtfile env variable is correctly set for any Espressobin variant.

We have tested that fdtfile env variable is correctly set on Espressobin variants with eMMC, without eMMC, with DDR3 RAM and also with DDR4 RAM. Also that eMMC is working on Espressobin variant with eMMC.

Pali Roh?r (4):
Revert "arm64: dts: armada-3720-espressobin: split common parts to

    .dtsi"

Revert "arm64: dts: a3720: add support for espressobin with populated
emmc"
arm: mvebu: Espressobin: Add support for emmc into dts file
arm: mvebu: Espressobin: Detect presence of emmc at runtime

 arch/arm/dts/Makefile                         |   1 -
 arch/arm/dts/armada-3720-espressobin-emmc.dts |  44 -----
 arch/arm/dts/armada-3720-espressobin.dts      | 186 +++++++++++++++++-
 arch/arm/dts/armada-3720-espressobin.dtsi     | 167 ----------------
 board/Marvell/mvebu_armada-37xx/board.c       |   6 +-
 doc/README.marvell                            |   7 +-
 6 files changed, 186 insertions(+), 225 deletions(-)
 delete mode 100644 arch/arm/dts/armada-3720-espressobin-emmc.dts
 delete mode 100644 arch/arm/dts/armada-3720-espressobin.dtsi
Signature · 1 line
2.20.1