Skip to content

brcmstb: add EP regulators and panic handler

Jim Quinlan linux-arm-kernel linux-devicetree linux-pci lkml 2 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest6 patches 17 repliesIn review
  2. v16 patches 3 repliesSuperseded

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/6dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulatorsDocumentation/devicetree/bindings/pci/brcm,stb-pcie.yaml+12 -06 replies
2/6PCI: brcmstb: Add control of EP voltage regulator(s)drivers/pci/controller/pcie-brcmstb.c+37 -11 reply
3/6PCI: brcmstb: Do not turn off regulators if EP can wake updrivers/pci/controller/pcie-brcmstb.c+51 -71 reply
4/6PCI: brcmstb: Give 7216 SOCs their own config typedrivers/pci/controller/pcie-brcmstb.c+8 -11 reply
5/6PCI: brcmstb: Add panic/die handler to RC driverdrivers/pci/controller/pcie-brcmstb.c+124 -06 replies
6/6PCI: brcmstb: check return value of clk_prepare_enable()drivers/pci/controller/pcie-brcmstb.c+3 -11 reply

Reviews trailers per patch

3 of 6 patches have a Reviewed-by or Acked-by.

PatchFlorian Fainelli
1/6
2/6
3/6
4/6A-b
5/6A-b
6/6A-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [PATCH v2 0/6] brcmstb: add EP regulators and panic handler

v2 -- Use regulator bulk API rather than multiple calls (MarkB).

v1 -- Bindings are added for fixed regulators that may power the EP device.
-- The brcmstb RC driver is modified to control these regulators
during probe, suspend, and resume.
-- 7216 type SOCs have additional error reporting HW and a
panic handler is added to dump its info.
-- A missing return value check is added.

Jim Quinlan (6):
dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators
PCI: brcmstb: Add control of EP voltage regulator(s)
PCI: brcmstb: Do not turn off regulators if EP can wake up
PCI: brcmstb: Give 7216 SOCs their own config type
PCI: brcmstb: Add panic/die handler to RC driver
PCI: brcmstb: check return value of clk_prepare_enable()

 .../bindings/pci/brcm,stb-pcie.yaml           |  12 +
 drivers/pci/controller/pcie-brcmstb.c         | 219 +++++++++++++++++-
 2 files changed, 228 insertions(+), 3 deletions(-)
Signature · 1 line
2.17.1