Add clock drivers for SM8350

This adds gcc clock controller drivers for the controller found in SM8350 SoC

Changes in v5:
- Add r-b from AngeloGioacchino and Bjorn
- Removed unused clock indices
- Initialize variable before use in regmap read

Changes in v4:
- Add Ack from Rob on binding
- modularize alpha_pll_trion_set_rate()

Changes in v3:
- Drop rpmh clk patches applied
- Add a new patch to replace regval with val as suggested by Stephen
- Fix comments for new Lucid 5LPE PLL: sort new defines by BIT numbers, fix comments, use alpha_pll_check_rate_margin(), rework clk_lucid_5lpe_pll_postdiv_set_rate() logic
- Add power domains and optional clocks in bindings
- Fix comments for gcc sm8350 driver: clean includes used, use only .fw_name for clocks defined in DT, use floor ops for sdcc clocks, remove critical clocks and enable them in probe, add comments for clks using BRANCH_HALT_SKIP and BRANCH_HALT_DELAY

Changes in v2:
- Add r-b from Bjorn
- Add the gcc_qupv3_wrap_1_{m|s}_ahb_clk and gcc_qupv3_wrap1_s5_clk

Vinod Koul (3):
clk: qcom: clk-alpha-pll: replace regval with val
clk: qcom: clk-alpha-pll: modularize alpha_pll_trion_set_rate()
dt-bindings: clock: Add SM8350 GCC clock bindings

Vivek Aknurwar (2):
clk: qcom: clk-alpha-pll: Add support for Lucid 5LPE PLL
clk: qcom: gcc: Add clock driver for SM8350

 .../bindings/clock/qcom,gcc-sm8350.yaml       |   96 +
 drivers/clk/qcom/Kconfig                      |    8 +
 drivers/clk/qcom/Makefile                     |    1 +
 drivers/clk/qcom/clk-alpha-pll.c              |  209 +-
 drivers/clk/qcom/clk-alpha-pll.h              |    4 +
 drivers/clk/qcom/gcc-sm8350.c                 | 3790 +++++++++++++++++
 include/dt-bindings/clock/qcom,gcc-sm8350.h   |  254 ++
 7 files changed, 4346 insertions(+), 16 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml
 create mode 100644 drivers/clk/qcom/gcc-sm8350.c
 create mode 100644 include/dt-bindings/clock/qcom,gcc-sm8350.h

2.26.2