Skip to content

pinctrl: ralink: pinctrl driver for the rt2880 family

Sergio Paracuellos linux-devicetree linux-gpio 2 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest2 patches 5 repliesIn review
  2. v13 patches 6 repliesSuperseded

Changes in v2 from the cover letter

- Squash PATCH 2/3 and PATCH 3/3 in only one.
- Put driver inside 'ralink' subdir of pinctrl.
- Add Linus'Acked-by for driver after squashing two patches.
- Make changes suggested by Linus in bindings doc: [1].
NOTE that I simplified but not removes if-clause because without that I am not be able to validate using 'dt_binding_check' with errors in all pinctrl nodes because are not of type 'object'.

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2dt-bindings: pinctrl: rt2880: add binding documentDocumentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml+70 -02 replies
2/2pinctrl: ralink: add a pinctrl driver for the rt2880 familydrivers/pinctrl/Kconfig drivers/pinctrl/Makefile drivers/pinctrl/ralink/Kconfig +6 more+18 -193 replies

Reviews trailers per patch

1 of 2 patches has a Reviewed-by or Acked-by.

PatchLinus Walleij
1/2
2/2A-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [PATCH v2 0/2] pinctrl: ralink: pinctrl driver for the rt2880 family

This series adds a pinctrl driver for ralink rt2880 SoC.

After last cleanup in staging I was told [0] this driver is ready to be promoted from staging.

This series are rebased on the top of staging-testing.

Thanks in advance for your time.

Changes in v2:
- Squash PATCH 2/3 and PATCH 3/3 in only one.
- Put driver inside 'ralink' subdir of pinctrl.
- Add Linus'Acked-by for driver after squashing two patches.
- Make changes suggested by Linus in bindings doc: [1].
NOTE that I simplified but not removes if-clause because without that I am not be able to validate using 'dt_binding_check' with errors in all pinctrl nodes because are not of type 'object'.

Best regards,
Sergio Paracuellos

[0]: http://driverdev.linuxdriverproject.org/pipermail/driverdev-devel/2020-December/149178.html
[1]: http://driverdev.linuxdriverproject.org/pipermail/driverdev-devel/2020-December/149204.html

*** BLURB HERE ***

Sergio Paracuellos (2):
dt-bindings: pinctrl: rt2880: add binding document
pinctrl: ralink: add a pinctrl driver for the rt2880 family

 .../pinctrl/ralink,rt2880-pinmux.yaml         | 70 +++++++++++++++++++
 drivers/pinctrl/Kconfig                       |  1 +
 drivers/pinctrl/Makefile                      |  1 +
 drivers/pinctrl/ralink/Kconfig                | 14 ++++
 .../ralink}/Makefile                          |  2 -
 .../ralink}/pinctrl-rt2880.c                  |  4 +-
 drivers/staging/Kconfig                       |  2 -
 drivers/staging/Makefile                      |  1 -
 drivers/staging/mt7621-pinctrl/Kconfig        |  6 --
 drivers/staging/mt7621-pinctrl/TODO           |  6 --
 10 files changed, 88 insertions(+), 19 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
 create mode 100644 drivers/pinctrl/ralink/Kconfig
 rename drivers/{staging/mt7621-pinctrl => pinctrl/ralink}/Makefile (66%)
 rename drivers/{staging/mt7621-pinctrl => pinctrl/ralink}/pinctrl-rt2880.c (99%)
 delete mode 100644 drivers/staging/mt7621-pinctrl/Kconfig
 delete mode 100644 drivers/staging/mt7621-pinctrl/TODO
Signature · 1 line
2.25.1