Skip to content

nfc: s3fwrn5: Change I2C interrupt trigger to EDGE_RISING

Bongsu Jeon linux-devicetree linux-nfc lkml netdev oe-linux-nfc 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v2 Latest2 patches 2 repliesIn review

Changes in v2 from the cover letter

2/2
- remove the hard coded interrupt trigger type.

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2dt-bindings: net: nfc: s3fwrn5: Change I2C interrupt trigger typeDocumentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml+1 -10 replies
2/2nfc: s3fwrn5: Remove hard coded interrupt trigger type from the i2c moduledrivers/nfc/s3fwrn5/i2c.c+6 -11 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCH v2 net-next 0/2] nfc: s3fwrn5: Change I2C interrupt trigger to EDGE_RISING

From: Bongsu Jeon <[email protected]>

For stable Samsung's I2C interrupt handling, I changed the interrupt trigger from IRQ_TYPE_LEVEL_HIGH to IRQ_TYPE_EDGE_RISING and removed the hard coded interrupt trigger type in the i2c module for the flexible control.

1/2 is the changed dt binding for the edge rising trigger. 2/2 is to remove the hard coded interrupt trigger type in the i2c module.

ChangeLog:
v2:
2/2
- remove the hard coded interrupt trigger type.

Bongsu Jeon (2):
dt-bindings: net: nfc: s3fwrn5: Change I2C interrupt trigger to
EDGE_RISING
nfc: s3fwrn5: Remove hard coded interrupt trigger type from the i2c
module

 .../devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml      | 2 +-
 drivers/nfc/s3fwrn5/i2c.c                                 | 8 +++++++-
 2 files changed, 8 insertions(+), 2 deletions(-)
Signature · 1 line
2.17.1