Skip to content

arm: xea: Regression fixes for i.MX28 based XEA board

Lukasz Majewski u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3xea: spl: Disable pull UP for GPIO0_2{35}board/liebherr/xea/spl_xea.c+1 -11 reply
2/3xea: config: Use CONFIG_PREBOOT from Kconfigconfigs/imx28_xea_defconfig include/configs/xea.h+2 -12 replies
3/3xea: config: Disable CONFIG_SPL_OF_PLATDATA_PARENT on XEA (imx28)configs/imx28_xea_defconfig+1 -02 replies

Reviews trailers per patch

1 of 3 patches has a Reviewed-by or Acked-by.

PatchSimon Glass
1/3
2/3
3/3R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH v1 0/3] arm: xea: Regression fixes for i.MX28 based XEA board

This patch set provides boot regression fix and some enhancements for i.MX28 based XEA board.

The most notably one is the disablement of CONFIG_SPL_OF_PLATDATA_PARENT which prevents from having the board bricked.

Lukasz Majewski (3):
xea: spl: Disable pull UP for GPIO0_2{35}
xea: config: Use CONFIG_PREBOOT from Kconfig
xea: config: Disable CONFIG_SPL_OF_PLATDATA_PARENT on XEA (imx28)

 board/liebherr/xea/spl_xea.c | 2 +-
 configs/imx28_xea_defconfig  | 3 +++
 include/configs/xea.h        | 1 -
 3 files changed, 4 insertions(+), 2 deletions(-)
Signature · 1 line
2.20.1