Skip to content

usbtty/musb: Fix file transfers

Pali Rohár u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest4 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/4serial: usbtty: Send urb data in correct orderdrivers/serial/usbtty.c+3 -90 replies
2/4usb: musb: Fix receiving of bigger buffersdrivers/usb/musb/musb_udc.c+15 -10 replies
3/4usb: musb: Fix handling interrupts for EP0 and SET ADDRESS commmanddrivers/usb/musb/musb_udc.c+4 -81 reply
3/4usb: musb: Fix handling interrupts for EP0 and SET ADDRESS commmand+0 -01 reply
3/4usb: musb: Fix handling interrupts for EP0 and SET ADDRESS commmand+0 -00 replies
4/4usb: musb: Ensure that we set musb dynamic FIFO buffer for every endpointdrivers/usb/musb/musb_udc.c+2 -120 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/4] usbtty/musb: Fix file transfers

This is second usbtty patch series which is fixing stability of musb code and allows usage of file transfers via Kermit protocol on Nokia N900.

Kermit file transfer via U-Boot loadb command is stable on Nokia N900 and gives about 52kB/s transfer rate.

This patch series depends on previous patch series:
"Nokia RX-51: Fix USB TTY console and enable it"

Pali Roh?r (4):
serial: usbtty: Send urb data in correct order
usb: musb: Fix receiving of bigger buffers
usb: musb: Fix handling interrupts for EP0 and SET ADDRESS commmand
usb: musb: Ensure that we set musb dynamic FIFO buffer for every
endpoint

 drivers/serial/usbtty.c     | 12 +++--------
 drivers/usb/musb/musb_udc.c | 42 ++++++++++++++++++-------------------
 2 files changed, 24 insertions(+), 30 deletions(-)
Signature · 1 line
2.20.1