Skip to content

net: ks8851: Add KS8851 PHY support

Marek Vasut netdev 3 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest2 patches 1 replyIn review
  2. v22 patches 3 repliesSuperseded
  3. v12 patches 7 repliesSuperseded

Patches in v3 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2net: phy: micrel: Add KS8851 PHY supportdrivers/net/phy/micrel.c+1 -10 replies
2/2net: ks8851: Register MDIO bus and the internal PHYdrivers/net/ethernet/micrel/ks8851.h drivers/net/ethernet/micrel/ks8851_common.c+98 -160 replies

Reviews trailers per patch

All 2 patches have a Reviewed-by or Acked-by.

PatchAndrew Lunn
1/2R-b
2/2R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v3 thread

Cover letter [PATCH net-next V3 0/2] net: ks8851: Add KS8851 PHY support

The KS8851 has a reduced internal PHY, which is accessible through its registers at offset 0xe4. The PHY is compatible with KS886x PHY present in Micrel switches, including the PHY ID Low/High registers swap, which is present both in the MAC and the switch.

Marek Vasut (2):
net: phy: micrel: Add KS8851 PHY support
net: ks8851: Register MDIO bus and the internal PHY

 drivers/net/ethernet/micrel/ks8851.h        |   2 +
 drivers/net/ethernet/micrel/ks8851_common.c | 112 +++++++++++++++++---
 drivers/net/phy/micrel.c                    |   2 +-
 3 files changed, 99 insertions(+), 17 deletions(-)
Cc Andrew Lunn <[email protected]>
Cc Heiner Kallweit <[email protected]>
Cc Lukas Wunner <[email protected]>
Signature · 1 line
2.29.2