Skip to content

Add support for TI AM18XX/OMAP-L138 PRUSS

David Lechner linux-arm-kernel linux-devicetree lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 7 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2dt-bindings: soc: ti: ti,pruss: add ti,am1806-prussDocumentation/devicetree/bindings/soc/ti/ti,pruss.yaml+2 -04 replies
2/2soc: ti: pruss: add support for AM18XX/OMAP-L138 PRUSSdrivers/soc/ti/Kconfig drivers/soc/ti/pruss.c+45 -332 replies

Reviews trailers per patch

1 of 2 patches has a Reviewed-by or Acked-by.

PatchRob Herring
1/2A-b
2/2

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/2] Add support for TI AM18XX/OMAP-L138 PRUSS

This is the first step for adding support for the PRUSS on TI AM18XX/OMAP-L138 SoCs. This series adds support in the top-level PRUSS driver. (Patches for the interrupt controller and individual PRUs are independent of this change and will be submitted separately.)

David Lechner (2):
dt-bindings: soc: ti: ti,pruss: add ti,am1806-pruss
soc: ti: pruss: add support for AM18XX/OMAP-L138 PRUSS

 .../devicetree/bindings/soc/ti/ti,pruss.yaml  |  2 +
 drivers/soc/ti/Kconfig                        |  2 +-
 drivers/soc/ti/pruss.c                        | 76 +++++++++++--------
 3 files changed, 47 insertions(+), 33 deletions(-)
Signature · 1 line
2.25.1