Skip to content

Add 100 base-x mode

Bjarni Jonasson lkml netdev 2 versions – Applied

Status from this message: This series was applied to netdev/net-next.git (refs/heads/master):

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest2 patches 2 repliesApplied 2/2
  2. v12 patches 13 repliesSuperseded

Changes in v2 from the cover letter

Added description to Documentation/networking/phy.rst Moved PHY_INTERFACE_MODE_100BASEX to above 1000BASEX Patching against net-next

Patches in v2 All 2 applied

#Subject and filesSizeRepliesApplied
1/2net: phy: Add 100 base-x modeDocumentation/networking/phy.rst include/linux/phy.h+9 -01 replyApplied
2/2sfp: add support for 100 base-x SFPsdrivers/net/phy/sfp-bus.c+9 -01 replyApplied

Reviews trailers per patch

All 2 patches have a Reviewed-by or Acked-by.

PatchRussell King
1/2R-b
2/2R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [PATCH net-next v2 0/2] Add 100 base-x mode

Adding support for 100 base-x in phylink.
The Sparx5 switch supports 100 base-x pcs (IEEE 802.3 Clause 24) 4b5b encoded. These patches adds phylink support for that mode.

Tested in Sparx5, using sfp modules:
Axcen 100fx AXFE-1314-0521 (base-fx)
Axcen 100lx AXFE-1314-0551 (base-lx)
HP SFP 100FX J9054C (bx-10)
Excom SFP-SX-M1002 (base-lx)

v1 -> v2:
Added description to Documentation/networking/phy.rst Moved PHY_INTERFACE_MODE_100BASEX to above 1000BASEX Patching against net-next

Bjarni Jonasson (2):
net: phy: Add 100 base-x mode
sfp: add support for 100 base-x SFPs

 Documentation/networking/phy.rst | 5 +++++
 drivers/net/phy/sfp-bus.c        | 9 +++++++++
 include/linux/phy.h              | 4 ++++
 3 files changed, 18 insertions(+)
Signature · 1 line
2.17.1