Skip to content

dmaengine: ti: k3-udma: memcpy throughput improvement

Peter Ujfalusi dmaengine lkml 1 version Applied

Status from this message: Applied, thanks

Get series with b4
b4 am [email protected]

Versions newest first

  1. v2 Latest3 patches 1 replyApplied

Changes in v2 from the cover letter

- Added Kishon's tested-by to the first two patch
- Moved the variable definitions to the start of their respective functions
- Remove braces where they are not needed
- correct indentation of cases
- additional patch to clean up the ret = 0 initializations in tisci channel configuration functions, no functional changes.

Patches in v2 Applied

#Subject and filesSizeRepliesApplied
1/3dmaengine: Extend the dmaengine_alignment for 128 and 256 bytesinclude/linux/dmaengine.h+2 -00 replies
2/3dmaengine: ti: k3-udma: Add support for burst_size configuration for mem2memdrivers/dma/ti/k3-udma.c+111 -50 replies
3/3dmaengine: ti: k3-udma: Do not initialize ret in tisci channel config functionsdrivers/dma/ti/k3-udma.c+7 -70 replies

Reviews trailers per patch

None of the 3 patches has a Reviewed-by or Acked-by.

PatchKishon Vijay Abraham I
1/3T-b
2/3T-b
3/3

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [PATCH v2 0/3] dmaengine: ti: k3-udma: memcpy throughput improvement

Hi,

Changes since v1:
- Added Kishon's tested-by to the first two patch
- Moved the variable definitions to the start of their respective functions
- Remove braces where they are not needed
- correct indentation of cases
- additional patch to clean up the ret = 0 initializations in tisci channel configuration functions, no functional changes.

Newer members of the KS3 family (after AM654) have support for burst_size configuration for each DMA channel.

The HW default value is 64 bytes but on higher throughput channels it can be increased to 256 bytes (UCHANs) or 128 byes (HCHANs).

Aligning the buffers and length of the transfer to the burst size also increases the throughput.

Numbers gathered on j721e (UCHAN pair):
echo 8000000 > /sys/module/dmatest/parameters/test_buf_size echo 2000 > /sys/module/dmatest/parameters/timeout echo 50 > /sys/module/dmatest/parameters/iterations echo 1 > /sys/module/dmatest/parameters/max_channels

Prior to  this patch:   ~1.3 GB/s
After this patch:       ~1.8 GB/s

with 1 byte alignment: ~1.7 GB/s

Regards,
Peter
---
Peter Ujfalusi (3):
dmaengine: Extend the dmaengine_alignment for 128 and 256 bytes
dmaengine: ti: k3-udma: Add support for burst_size configuration for
mem2mem
dmaengine: ti: k3-udma: Do not initialize ret in tisci channel config
functions

 drivers/dma/ti/k3-udma.c  | 130 ++++++++++++++++++++++++++++++++++----
 include/linux/dmaengine.h |   2 +
 2 files changed, 120 insertions(+), 12 deletions(-)
Signature · 1 line
2.30.0