Allow VADC_LR_MUX2_BAT_ID channel proper reading
Status from this message: Applied to the fixes-togreg branch of iio.git and marked for stable.
Get series with b4
b4 am [email protected]Versions newest first
Patches in v1 Applied
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/2 | iio:adc:qcom-spmi-vadc: add default scale to LR_MUX2_BAT_ID channeldrivers/ | +1 | 3 replies | |
| 2/2 | arm64: dts: qcom: pm8916: Add batt_id channel nodearch/ | +5 | 0 replies |
Reviews trailers per patch
1 of 2 patches has a Reviewed-by or Acked-by.
| Patch | Bjorn Andersson |
|---|---|
| 1/2 | A-b |
| 2/2 |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH 0/2] Allow VADC_LR_MUX2_BAT_ID channel proper reading
Working on a battery charger and fuel gauge driver it happened to have the need to read from VADC_LR_MUX2_BAT_ID channel. Here is the declaration from downstream msm8916.dtsi:
chan@31 {
label = "batt_id";
reg = <0x31>;
qcom,decimation = <0>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <0>;
qcom,hw-settle-time = <0xb>;
qcom,fast-avg-setup = <0>;
};Those two patches set channel scaling accordingly and add it to pm8916 device tree.
Jonathan Albrieux (2):
iio:adc:qcom-spmi-vadc: add default scale to LR_MUX2_BAT_ID channel
arm64: dts: qcom: pm8916: Add batt_id channel node
arch/arm64/boot/dts/qcom/pm8916.dtsi | 5 +++++ drivers/iio/adc/qcom-spmi-vadc.c | 2 +- 2 files changed, 6 insertions(+), 1 deletion(-)
Signature · 1 line
2.17.1