Skip to content

tpm_tis: handle -EPROBE_DEFER in tpm_tis_plat_probe()

Dirk Gouders linux-integrity lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest1 patch 1 replyIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/1tpm_tis: handle -EPROBE_DEFER in tpm_tis_plat_probe()drivers/char/tpm/tpm_tis.c+3 -01 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/1] tpm_tis: handle -EPROBE_DEFER in tpm_tis_plat_probe()

Hello,

I noticed that the tpm_tis driver behaves different depending on wether it was compiled builtin or as a module.

At least on my hardware, if builtin it always falls back to polling mode without notification which I do not understand considering the current efforts to fix interrupt probing[1].

The builtin case could be fixed by handling -EPROBE_DEFER. With a temporary dev_dbg() call added and James Bottomley's "[PATCH v2 4/5] tpm_tis: fix IRQ probing [1]" applied my kernel log looks like this:

[    2.671629] tpm_tis STM0125:00: Waiting for interrupt...
[    2.851920] tpm_tis STM0125:00: Waiting for interrupt...
[    2.852627] tpm_tis STM0125:00: Waiting for interrupt...
[    2.908286] tpm_tis STM0125:00: Waiting for interrupt...
[    3.340223] tpm_tis STM0125:00: Waiting for interrupt...
[    3.407238] tpm_tis STM0125:00: Waiting for interrupt...
[    3.408178] tpm_tis STM0125:00: Waiting for interrupt...
[    3.408994] tpm_tis STM0125:00: Waiting for interrupt...
[    3.487694] tpm_tis STM0125:00: Waiting for interrupt...
[    3.773769] tpm_tis STM0125:00: Waiting for interrupt...
[    3.868590] tpm_tis STM0125:00: Waiting for interrupt...
[    3.923855] tpm_tis STM0125:00: Waiting for interrupt...
[    4.235670] tpm_tis STM0125:00: Waiting for interrupt...
[    4.852556] tpm_tis STM0125:00: Waiting for interrupt...
[    6.767544] tpm_tis STM0125:00: 2.0 TPM (device-id 0x0, rev-id 78)
[    6.767567] tpm_tis STM0125:00: TPM interface capabilities (0x30000415):
[    6.767569] tpm_tis STM0125:00: 	Interrupt Level Low
[    6.767570] tpm_tis STM0125:00: 	Locality Change Int Support
[    6.767570] tpm_tis STM0125:00: 	Data Avail Int Support

Of course, this patch should not be added before Jarkko's fix [2], because builtin drivers would then hit the WARN_ONCE(), as well.

Dirk

[1] https://lore.kernel.org/linux-integrity/[email protected]/
[2] https://lore.kernel.org/linux-integrity/[email protected]/T/#t

Dirk Gouders (1):
tpm_tis: handle -EPROBE_DEFER in tpm_tis_plat_probe()

 drivers/char/tpm/tpm_tis.c | 3 +++
 1 file changed, 3 insertions(+)
Signature · 1 line
2.26.2