Skip to content

TI/Cadence: Add Sierra/Torrent SERDES driver

Kishon Vijay Abraham I u-boot 5 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v5 Latest20 patches 2 repliesIn review
  2. v421 patches 5 repliesSuperseded
  3. v320 patches 0 repliesSuperseded
Earlier versions · 2
VersionPostedPatchesRepliesStatus
v217 patches0 repliesSuperseded
v116 patches0 repliesSuperseded

Changes in v5 from the cover letter

1) Dropped [PATCH v4 01/21] drivers: reset: Add devm_to_reset() to return dummy "struct reset_ctl" and will be worked independently of this series. This was mainly introduced for handling optional reset which is not mandatory for both Sierra and Torrent.
2) Fixed sectionauthor name for j721e_evm.rst

Patches in v5 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/20dm: core: Add helper to compare node namesdrivers/core/ofnode.c include/dm/ofnode.h+23 -01 reply
2/20dm: test: Add test case to check node name ignoring unit addresstest/dm/core.c+14 -00 replies
3/20dt-bindings: phy: Add definitions for additional phy typesinclude/dt-bindings/phy/phy.h+1 -00 replies
4/20dt-bindings: phy: Add defines for AM64 SERDES Wrapperinclude/dt-bindings/phy/phy-ti.h+21 -00 replies
5/20dt-bindings: phy: cadence-torrent: Add defines for refclk driverinclude/dt-bindings/phy/phy-cadence.h+20 -00 replies
6/20dt-bindings: ti-serdes-mux: Add defines for AM64 SoCinclude/dt-bindings/mux/ti-serdes.h+5 -00 replies
7/20phy: cadence: Add driver for Sierra PHYdrivers/phy/Kconfig drivers/phy/Makefile drivers/phy/cadence/Kconfig +2 more+760 -00 replies
8/20phy: cadence: Add driver for Torrent SERDESdrivers/phy/cadence/Kconfig drivers/phy/cadence/Makefile drivers/phy/cadence/phy-cadence-torrent.c+2470 -00 replies
9/20phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoCdrivers/phy/Kconfig drivers/phy/Makefile drivers/phy/ti/Kconfig +2 more+1168 -00 replies
10/20board: ti: j721e: Add support for probing and configuring Torrent serdes on J7200board/ti/j721e/evm.c+33 -10 replies
11/20ARM: dts: k3-j721e: Add support for USB3 in USB0 instancearch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi+18 -10 replies
12/20arm: dts: k3-j7200-main: Add DT node for torrent serdesarch/arm/dts/k3-j7200-main.dtsi+63 -00 replies
13/20arm: dts: k3-j7200-common-proc-board: Enable SERDES DTarch/arm/dts/k3-j7200-common-proc-board.dts+23 -00 replies
14/20arm: dts: k3-j7200-common-proc-board-u-boot: Add u-boot tags for torrent serdesarch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi+12 -00 replies
15/20configs: j721e_evm_a72_defconfig: Enable the drivers required for the USB3 supportconfigs/j721e_evm_a72_defconfig+6 -00 replies
16/20configs: j7200_evm_a72_defconfig: Add config for torrent serdes and common clock frameworkconfigs/j7200_evm_a72_defconfig+7 -00 replies
17/20env: ti: j721e-evm: Add env variable to power on & reset QSGMII PHY in J7200 EVMinclude/configs/j721e_evm.h+15 -10 replies
18/20configs: j7200_evm_a72: Add CONFIG_PREBOOT to configure ethernet PHYconfigs/j7200_evm_a72_defconfig+1 -00 replies
19/20doc: board: Move j721e document to doc/board/ti/ directoryboard/ti/j721e/README doc/board/index.rst doc/board/ti/j721e_evm.rst+317 -2770 replies
20/20doc: board: j721e_evm: Add documentation for firmware loadingdoc/board/ti/j721e_evm.rst+15 -00 replies

Reviews trailers per patch

3 of 20 patches have a Reviewed-by or Acked-by.

PatchSimon GlassSuman Anna
1/20R-b
2/20R-b
3/20
4/20
5/20
6/20
7/20
8/20
9/20
10/20
11/20
12/20
13/20
14/20
15/20
16/20
17/20R-b
18/20
19/20
20/20

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v5 thread

Cover letter [PATCH v5 00/20] TI/Cadence: Add Sierra/Torrent SERDES driver

Patch series adds Sierra and Torrent SERDES driver for the SERDES used in TI's K3 platforms. This SERDES is used by USB3, PCIe and Ethernet. This series is mostly an adaptation of drivers added in upstream Linux kernel.

Changes from v4:
1) Dropped [PATCH v4 01/21] drivers: reset: Add devm_to_reset() to return dummy "struct reset_ctl" and will be worked independently of this series. This was mainly introduced for handling optional reset which is not mandatory for both Sierra and Torrent.
2) Fixed sectionauthor name for j721e_evm.rst

Changes from v3:
1) Dropped "drivers: reset: Handle gracefully NULL pointers" and added "drivers: reset: Add devm_to_reset() to return dummy "struct reset_ctl"
2) Moved documentation from board/ti/j721e/README to doc/board/ti/j721e_evm.rst
3) Adapted Sierra and Torrent driver to 1).

Changes from v2:
1) Re-worked "Handle gracefully NULL pointers" to fix Simons comments
2) Ported the part that allows creating clocks without explicit sub-nodes in DT from the upstream linux kernel.

Changes from v1:
1) Fixed string comparison strncmp() to remove "=="
2) Added a test for node name comparison to ignore unit address in test/dm
3) Added better commit message in "drivers: reset: Handle gracefully NULL pointers"

Alan Douglas (1):
phy: cadence: Add driver for Sierra PHY

Aswath Govindraju (7):
dt-bindings: phy: Add definitions for additional phy types
phy: cadence: Add driver for Torrent SERDES
board: ti: j721e: Add support for probing and configuring Torrent

    serdes on J7200

arm: dts: k3-j7200-main: Add DT node for torrent serdes
arm: dts: k3-j7200-common-proc-board: Enable SERDES DT
arm: dts: k3-j7200-common-proc-board-u-boot: Add u-boot tags for
torrent serdes
configs: j7200_evm_a72_defconfig: Add config for torrent serdes and
common clock framework

Jean-Jacques Hiblot (2):
phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC
configs: j721e_evm_a72_defconfig: Enable the drivers required for the
USB3 support

Kishon Vijay Abraham I (10):
dm: core: Add helper to compare node names
dm: test: Add test case to check node name ignoring unit address
dt-bindings: phy: Add defines for AM64 SERDES Wrapper
dt-bindings: phy: cadence-torrent: Add defines for refclk driver
dt-bindings: ti-serdes-mux: Add defines for AM64 SoC
ARM: dts: k3-j721e: Add support for USB3 in USB0 instance
env: ti: j721e-evm: Add env variable to power on & reset QSGMII PHY in

    J7200 EVM

configs: j7200_evm_a72: Add CONFIG_PREBOOT to configure ethernet PHY
doc: board: Move j721e document to doc/board/ti/ directory
doc: board: j721e_evm: Add documentation for firmware loading

 .../k3-j7200-common-proc-board-u-boot.dtsi    |   12 +
 arch/arm/dts/k3-j7200-common-proc-board.dts   |   23 +
 arch/arm/dts/k3-j7200-main.dtsi               |   63 +
 .../k3-j721e-common-proc-board-u-boot.dtsi    |   19 +-
 board/ti/j721e/README                         |  277 --
 board/ti/j721e/evm.c                          |   34 +-
 configs/j7200_evm_a72_defconfig               |    8 +
 configs/j721e_evm_a72_defconfig               |    6 +
 doc/board/index.rst                           |    1 +
 doc/board/ti/j721e_evm.rst                    |  331 +++
 drivers/core/ofnode.c                         |   13 +
 drivers/phy/Kconfig                           |    3 +
 drivers/phy/Makefile                          |    2 +
 drivers/phy/cadence/Kconfig                   |   11 +
 drivers/phy/cadence/Makefile                  |    2 +
 drivers/phy/cadence/phy-cadence-sierra.c      |  751 +++++
 drivers/phy/cadence/phy-cadence-torrent.c     | 2463 +++++++++++++++++
 drivers/phy/ti/Kconfig                        |    9 +
 drivers/phy/ti/Makefile                       |    1 +
 drivers/phy/ti/phy-j721e-wiz.c                | 1156 ++++++++
 include/configs/j721e_evm.h                   |   16 +-
 include/dm/ofnode.h                           |   10 +
 include/dt-bindings/mux/ti-serdes.h           |    5 +
 include/dt-bindings/phy/phy-cadence.h         |   20 +
 include/dt-bindings/phy/phy-ti.h              |   21 +
 include/dt-bindings/phy/phy.h                 |    1 +
 test/dm/core.c                                |   14 +
 27 files changed, 4992 insertions(+), 280 deletions(-)
 delete mode 100644 board/ti/j721e/README
 create mode 100644 doc/board/ti/j721e_evm.rst
 create mode 100644 drivers/phy/cadence/Kconfig
 create mode 100644 drivers/phy/cadence/Makefile
 create mode 100644 drivers/phy/cadence/phy-cadence-sierra.c
 create mode 100644 drivers/phy/cadence/phy-cadence-torrent.c
 create mode 100644 drivers/phy/ti/Kconfig
 create mode 100644 drivers/phy/ti/Makefile
 create mode 100644 drivers/phy/ti/phy-j721e-wiz.c
 create mode 100644 include/dt-bindings/phy/phy-cadence.h
 create mode 100644 include/dt-bindings/phy/phy-ti.h
Signature · 1 line
2.17.1