Skip to content

perf/x86/intel/uncore: Enable I/O stacks to IIO PMON mapping on SNR and ICX

[email protected] lkml 1 version Applied

Status from this message: The following commit has been merged into the perf/core branch of tip:

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 1 replyApplied

Patches in v1 Applied

#Subject and filesSizeRepliesApplied
1/3perf/x86/intel/uncore: Generalize I/O stacks to PMON mapping procedurearch/x86/events/intel/uncore.h arch/x86/events/intel/uncore_snbep.c+21 -60 replies
2/3perf/x86/intel/uncore: Enable I/O stacks to IIO PMON mapping on SNRarch/x86/events/intel/uncore_snbep.c+96 -00 replies
3/3perf/x86/intel/uncore: Enable I/O stacks to IIO PMON mapping on ICXarch/x86/events/intel/uncore_snbep.c+51 -00 replies

Reviews trailers per patch

All 3 patches have a Reviewed-by or Acked-by.

PatchKan Liang
1/3R-b
2/3R-b
3/3R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/3] perf/x86/intel/uncore: Enable I/O stacks to IIO PMON mapping on SNR and ICX

From: Alexander Antonov <[email protected]>

Currently I/O stacks to IIO PMON mapping is available on Skylake servers only and it is exposed through attributes /sys/devices/uncore_iio_<pmu_idx>/dieX, where dieX is a file which holds "Segment:Root Bus" for PCIe root port which can be monitored by that IIO PMON block.

The example for 2-S Skylake server:

# tail /sys/devices/uncore_iio_*/die*
==> /sys/devices/uncore_iio_0/die0 <==
0000:00
==> /sys/devices/uncore_iio_0/die1 <==
0000:80
==> /sys/devices/uncore_iio_1/die0 <==
0000:17
==> /sys/devices/uncore_iio_1/die1 <==
0000:85
==> /sys/devices/uncore_iio_2/die0 <==
0000:3a
==> /sys/devices/uncore_iio_2/die1 <==
0000:ae
==> /sys/devices/uncore_iio_3/die0 <==
0000:5d
==> /sys/devices/uncore_iio_3/die1 <==
0000:d7

Mapping algorithm for Skylake server is based on topology information from CPU_BUS_NO MSR but this approach is not applicable for Snowridge and Icelake server.
In case of these platforms mapping can be enabled by reading SAD_CONTROL_CFG CSR from Mesh2IIO device with 0x09a2 DID. This CSR contains stack IDs in its own notation and these IDs are statically mapped on IDs in PMON notation.

This patchset enables I/O stacks to IIO PMON mapping for Snowridge and Icelake server.

Alexander Antonov (3):
perf/x86/intel/uncore: Generalize I/O stacks to PMON mapping procedure perf/x86/intel/uncore: Enable I/O stacks to IIO PMON mapping on SNR perf/x86/intel/uncore: Enable I/O stacks to IIO PMON mapping on ICX

 arch/x86/events/intel/uncore.h       |   1 +
 arch/x86/events/intel/uncore_snbep.c | 173 ++++++++++++++++++++++++++-
 2 files changed, 168 insertions(+), 6 deletions(-)

base-commit: cface0326a6c2ae5c8f47bd466f07624b3e348a7

Signature · 1 line
2.21.3