Skip to content

J72xx: R5 SPL DMA support post HSM Rearch

Vignesh Raghavendra u-boot 2 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest7 patches 3 repliesIn review
  2. v17 patches 0 repliesSuperseded

Changes in v2 from the cover letter

Use IS_ENABLED() consistentially instead of #ifdef Reword commit msg for 5/7 as suggested by Lokesh Rebase on Tero's latest HSM base series.

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/7mailbox: k3-sec-proxy: Add DM to DMSC communication threaddrivers/mailbox/k3-sec-proxy.c+1 -10 replies
2/7firmware: ti_sci: Implement GET_RANGE with static datadrivers/firmware/ti_sci.c drivers/firmware/ti_sci_static_data.h+128 -00 replies
3/7firmware: ti_sci: Add support for Resoure Management at R5 SPL stage.doc/device-tree-bindings/firmware/ti,j721e-dm-sci.txt drivers/firmware/ti_sci.c+113 -100 replies
4/7ARM: dts: j72xx-r5-common-proc-board: Add DM firmware nodearch/arm/dts/k3-j7200-r5-common-proc-board.dts arch/arm/dts/k3-j721e-r5-common-proc-board.dts+35 -00 replies
5/7ARM: dts: k3: Add cfg register space for ringacc and udmaparch/arm/dts/k3-am654-base-board-u-boot.dtsi arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi+54 -00 replies
6/7soc: ti: k3-navss-ringacc: Add support for native configuration of ringsdrivers/soc/ti/k3-navss-ringacc-u-boot.c drivers/soc/ti/k3-navss-ringacc.c+94 -30 replies
7/7dma: ti: k3-udma: Add support for native configuration of chan/flowdrivers/dma/ti/k3-udma-u-boot.c drivers/dma/ti/k3-udma.c+215 -40 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCH v2 0/7] J72xx: R5 SPL DMA support post HSM Rearch

This series add DMA support for R5 SPL on J721e/J7200 SoCs post HSM Rearch.

Depends on Tero's base HSM rearch support series.

v2:
Use IS_ENABLED() consistentially instead of #ifdef Reword commit msg for 5/7 as suggested by Lokesh Rebase on Tero's latest HSM base series.

Vignesh Raghavendra (7):
mailbox: k3-sec-proxy: Add DM to DMSC communication thread
firmware: ti_sci: Implement GET_RANGE with static data
firmware: ti_sci: Add support for Resoure Management at R5 SPL stage.
ARM: dts: j72xx-r5-common-proc-board: Add DM firmware node
ARM: dts: k3: Add cfg register space for ringacc and udmap
soc: ti: k3-navss-ringacc: Add support for native configuration of
rings
dma: ti: k3-udma: Add support for native configuration of chan/flow

 arch/arm/dts/k3-am654-base-board-u-boot.dtsi  |  14 ++
 .../k3-j7200-common-proc-board-u-boot.dtsi    |  26 +++
 .../arm/dts/k3-j7200-r5-common-proc-board.dts |  17 ++
 .../k3-j721e-common-proc-board-u-boot.dtsi    |  14 ++
 .../arm/dts/k3-j721e-r5-common-proc-board.dts |  18 ++
 .../firmware/ti,j721e-dm-sci.txt              |  32 ++++
 drivers/dma/ti/k3-udma-u-boot.c               | 177 ++++++++++++++++++
 drivers/dma/ti/k3-udma.c                      |  42 ++++-
 drivers/firmware/ti_sci.c                     | 107 +++++++++++
 drivers/firmware/ti_sci_static_data.h         |  92 +++++++++
 drivers/mailbox/k3-sec-proxy.c                |   2 +-
 drivers/soc/ti/k3-navss-ringacc-u-boot.c      |  61 ++++++
 drivers/soc/ti/k3-navss-ringacc.c             |  36 +++-
 13 files changed, 630 insertions(+), 8 deletions(-)
 create mode 100644 doc/device-tree-bindings/firmware/ti,j721e-dm-sci.txt
 create mode 100644 drivers/dma/ti/k3-udma-u-boot.c
 create mode 100644 drivers/firmware/ti_sci_static_data.h
 create mode 100644 drivers/soc/ti/k3-navss-ringacc-u-boot.c
Signature · 1 line
2.31.1