Skip to content

Add Arduino Nano 33 BLE and BLE Sense support

Wojciech Zmuda yocto 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3zephyr-kernel: install .bin image if availablerecipes-kernel/zephyr-kernel/zephyr-kernel-common.inc recipes-kernel/zephyr-kernel/zephyr-sample.inc+5 -00 replies
2/3arduino-nano-33-ble.conf: Add Arduino Nano 33 BLE and BLE Sense supportconf/machine/arduino-nano-33-ble.conf+8 -00 replies
3/3zephyr-flash-bossac.bbclass: Enable board flashing via bossacclasses/zephyr-flash-bossac.bbclass conf/machine/arduino-nano-33-ble.conf+51 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [meta-zephyr][PATCH 0/3] Add Arduino Nano 33 BLE and BLE Sense support

From: Wojciech Zmuda <[email protected]>

This patch set adds support for nRF52-based Arduino boards - Nano 33 BLE and BLE Sense - to both build and flash Zephyr applications.

The board support itself is a trivial MACHINE config. Flashing is done with a new bbclass, that is a wrapper around bossac flashing tool. One general kernel recipe fix was necessary to produce and copy over the .bin file, as the flasher requires input in that format. This does not affect scenarios where .elf file is required.

Tested on an actual Arduino Nano 33 BLE dev board.

Nagesh Shamnur (3):
zephyr-kernel: install .bin image if available arduino-nano-33-ble.conf: Add Arduino Nano 33 BLE and BLE Sense
support
zephyr-flash-bossac.bbclass: Enable board flashing via bossac

 classes/zephyr-flash-bossac.bbclass           | 50 +++++++++++++++++++
 conf/machine/arduino-nano-33-ble.conf         |  9 ++++
 .../zephyr-kernel/zephyr-kernel-common.inc    |  1 +
 .../zephyr-kernel/zephyr-sample.inc           |  4 ++
 4 files changed, 64 insertions(+)
 create mode 100644 classes/zephyr-flash-bossac.bbclass
 create mode 100644 conf/machine/arduino-nano-33-ble.conf
Signature · 1 line
2.25.1