Skip to content

ARM: add NAND support to Ebang EBAZ4205 board

Michael Walle linux-arm-kernel linux-devicetree lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 2 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3ARM: configs: multi_v7: enable PL35x NAND controllerarch/arm/configs/multi_v7_defconfig+1 -00 replies
2/3ARM: dts: zynq: add NAND flash controller nodearch/arm/boot/dts/zynq-7000.dtsi+21 -00 replies
3/3ARM: dts: ebaz4205: enable NAND supportarch/arm/boot/dts/zynq-ebaz4205.dts+12 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/3] ARM: add NAND support to Ebang EBAZ4205 board

Thanks to Miguel, there is finally a NAND driver for this SoC and we can now support the NAND device on the EBAZ4205.

Btw. I'm not sure how often the PL35x NAND controller is used in SoC and if it qualifies to add it to the multi_v7 defconfig.

Michael Walle (3):
ARM: configs: multi_v7: enable PL35x NAND controller
ARM: dts: zynq: add NAND flash controller node
ARM: dts: ebaz4205: enable NAND support

 arch/arm/boot/dts/zynq-7000.dtsi    | 21 +++++++++++++++++++++
 arch/arm/boot/dts/zynq-ebaz4205.dts | 12 ++++++++++++
 arch/arm/configs/multi_v7_defconfig |  1 +
 3 files changed, 34 insertions(+)
Signature · 1 line
2.20.1