Skip to content

My AVIC patch queue

Maxim Levitsky kvm lkml 4 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v4 Latest16 patches 2 repliesIn review
  2. v312 patches 16 repliesSuperseded
  3. v28 patches 23 repliesApplied
Earlier versions · 1
VersionPostedPatchesRepliesStatus
v110 patches10 repliesApplied

Patches in v4 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/16Revert "KVM: x86/mmu: Allow zap gfn range to operate under the mmu read lock"arch/x86/kvm/mmu/mmu.c arch/x86/kvm/mmu/tdp_mmu.c arch/x86/kvm/mmu/tdp_mmu.h+16 -290 replies
2/16KVM: x86/mmu: fix parameters to kvm_flush_remote_tlbs_with_addressarch/x86/kvm/mmu/mmu.c+5 -10 replies
3/16KVM: x86/mmu: add comment explaining arguments to kvm_zap_gfn_rangearch/x86/kvm/mmu/mmu.c+4 -00 replies
4/16KVM: x86/mmu: bump mmu notifier count in kvm_zap_gfn_rangearch/x86/kvm/mmu/mmu.c include/linux/kvm_host.h virt/kvm/kvm_main.c+14 -20 replies
5/16KVM: x86/mmu: rename try_async_pf to kvm_faultin_pfnarch/x86/kvm/mmu/mmu.c arch/x86/kvm/mmu/paging_tmpl.h+3 -30 replies
6/16KVM: x86/mmu: allow kvm_faultin_pfn to return page fault handling codearch/x86/kvm/mmu/mmu.c arch/x86/kvm/mmu/paging_tmpl.h+12 -90 replies
7/16KVM: x86/mmu: allow APICv memslot to be enabled but invisiblearch/x86/kvm/mmu/mmu.c+18 -50 replies
8/16KVM: x86: don't disable APICv memslot when inhibitedarch/x86/include/asm/kvm-x86-ops.h arch/x86/include/asm/kvm_host.h arch/x86/kvm/svm/avic.c +3 more+14 -320 replies
9/16KVM: x86: APICv: fix race in kvm_request_apicv_update on SVMarch/x86/include/asm/kvm_host.h arch/x86/kvm/x86.c+30 -150 replies
10/16KVM: SVM: add warning for mistmatch between AVIC vcpu state and AVIC inhibitionarch/x86/kvm/svm/svm.c+2 -00 replies
11/16KVM: x86: hyper-v: Deactivate APICv only when AutoEOI feature is in usearch/x86/include/asm/kvm_host.h arch/x86/kvm/hyperv.c+32 -60 replies
12/16KVM: SVM: remove svm_toggle_avic_for_irq_windowarch/x86/kvm/svm/avic.c arch/x86/kvm/svm/svm.c arch/x86/kvm/svm/svm.h+2 -140 replies
13/16KVM: SVM: avoid refreshing avic if its state didn't changearch/x86/kvm/x86.c+8 -10 replies
14/16KVM: SVM: move check for kvm_vcpu_apicv_active outside of avic_vcpu_{put|load}arch/x86/kvm/svm/avic.c arch/x86/kvm/svm/svm.c+9 -80 replies
15/16KVM: SVM: call avic_vcpu_load/avic_vcpu_put when enabling/disabling AVICarch/x86/kvm/svm/avic.c+5 -00 replies
16/16KVM: SVM: AVIC: drop unsupported AVIC base relocation codearch/x86/kvm/svm/avic.c arch/x86/kvm/svm/svm.c arch/x86/kvm/svm/svm.h+2 -130 replies

Reviews trailers per patch

3 of 16 patches have a Reviewed-by or Acked-by.

PatchPaolo Bonzini
1/16
2/16
3/16
4/16
5/16R-b
6/16R-b
7/16
8/16
9/16
10/16
11/16
12/16R-b
13/16
14/16
15/16
16/16

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v4 thread

Cover letter [PATCH v4 00/16] My AVIC patch queue

Hi!

This is a series of bugfixes to the AVIC dynamic inhibition, which was made while trying to fix bugs as much as possible in this area and trying to make the AVIC+SYNIC conditional enablement work.

* Patches 1,3-8 are code from Sean Christopherson which implement an alternative approach of inhibiting AVIC without disabling its memslot.

V4: addressed review feedback.

* Patch 2 is new and it fixes a bug in kvm_flush_remote_tlbs_with_address

* Patches 9-10 in this series fix a race condition which can cause a lost write from a guest to APIC when the APIC write races the AVIC un-inhibition, and add a warning to catch this problem if it re-emerges again.

V4: applied review feedback from Paolo

* Patch 11 is the patch from Vitaly about allowing AVIC with SYNC as long as the guest doesn’t use the AutoEOI feature. I only slightly changed it to expose the AutoEOI cpuid bit regardless of AVIC enablement.

V4: fixed a race that Paolo pointed out.

* Patch 12 is a refactoring that is now possible in SVM AVIC inhibition code, because the RCU lock is not dropped anymore.

* Patch 13-15 fixes another issue I found in AVIC inhibit code:

Currently avic_vcpu_load/avic_vcpu_put are called on userspace entry/exit from KVM (aka kvm_vcpu_get/kvm_vcpu_put), and these functions update the "is running" bit in the AVIC physical ID remap table and update the target vCPU in iommu code.

However both of these functions don't do anything when AVIC is inhibited thus the "is running" bit will be kept enabled during the exit to userspace. This shouldn't be a big issue as the caller
doesn't use the AVIC when inhibited but still inconsistent and can trigger a warning about this in avic_vcpu_load.

To be on the safe side I think it makes sense to call avic_vcpu_put/avic_vcpu_load when inhibiting/uninhibiting the AVIC. This will ensure that the work these functions do is matched.

V4: I splitted a single patch to 3 patches to make it easier
to review, and applied Paolo's review feedback.

* Patch 16 removes the pointless APIC base
relocation from AVIC to make it consistent with the rest of KVM.

(both AVIC and APICv only support default base, while regular KVM, sort of support any APIC base as long as it is not RAM. If guest attempts to relocate APIC base to non RAM area, while APICv/AVIC are active, the new base will be non accelerated, while the default base will continue to be AVIC/APICv backed).

On top of that if guest uses different APIC bases on different vCPUs, KVM doesn't honour the fact that the MMIO range should only be active on that vCPU.

Best regards,
Maxim Levitsky

Maxim Levitsky (14):
KVM: x86/mmu: fix parameters to kvm_flush_remote_tlbs_with_address
KVM: x86/mmu: add comment explaining arguments to kvm_zap_gfn_range
KVM: x86/mmu: bump mmu notifier count in kvm_zap_gfn_range
KVM: x86/mmu: rename try_async_pf to kvm_faultin_pfn
KVM: x86/mmu: allow kvm_faultin_pfn to return page fault handling code
KVM: x86/mmu: allow APICv memslot to be enabled but invisible
KVM: x86: don't disable APICv memslot when inhibited
KVM: x86: APICv: fix race in kvm_request_apicv_update on SVM
KVM: SVM: add warning for mistmatch between AVIC vcpu state and AVIC
inhibition
KVM: SVM: remove svm_toggle_avic_for_irq_window
KVM: SVM: avoid refreshing avic if its state didn't change
KVM: SVM: move check for kvm_vcpu_apicv_active outside of

    avic_vcpu_{put|load}

KVM: SVM: call avic_vcpu_load/avic_vcpu_put when enabling/disabling
AVIC
KVM: SVM: AVIC: drop unsupported AVIC base relocation code

Sean Christopherson (1):
Revert "KVM: x86/mmu: Allow zap gfn range to operate under the mmu
read lock"

Vitaly Kuznetsov (1):
KVM: x86: hyper-v: Deactivate APICv only when AutoEOI feature is in
use

 arch/x86/include/asm/kvm-x86-ops.h |  1 -
 arch/x86/include/asm/kvm_host.h    | 13 +++++-
 arch/x86/kvm/hyperv.c              | 32 ++++++++++---
 arch/x86/kvm/mmu/mmu.c             | 75 ++++++++++++++++++++----------
 arch/x86/kvm/mmu/paging_tmpl.h     |  6 +--
 arch/x86/kvm/mmu/tdp_mmu.c         | 15 ++----
 arch/x86/kvm/mmu/tdp_mmu.h         | 11 ++---
 arch/x86/kvm/svm/avic.c            | 49 +++++++------------
 arch/x86/kvm/svm/svm.c             | 21 ++++-----
 arch/x86/kvm/svm/svm.h             |  8 ----
 arch/x86/kvm/x86.c                 | 67 +++++++++++++++-----------
 include/linux/kvm_host.h           |  5 ++
 virt/kvm/kvm_main.c                |  7 ++-
 13 files changed, 174 insertions(+), 136 deletions(-)
Signature · 1 line
2.26.3