Skip to content

allwinner: arm64: use mainline TF-A

Sergey Matyukevich buildroot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v3 Latest5 patches 0 repliesNew

Changes in v3 from the cover letter

- rework TF-A stack protection approach: add selection menu
- only keep the board that I can test: orangepi-zero-plus2
- cleanup commit messages: TF-A instead of ATF

Patches in v3 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5boot/arm-trusted-firmware: enable stack protection level selectionboot/arm-trusted-firmware/Config.in boot/arm-trusted-firmware/arm-trusted-firmware.mk+31 -31 reply
2/5support/testing: switch TestATFAllwinner to mainline TF-Asupport/testing/tests/boot/test_atf.py+5 -41 reply
3/5support/testing/tests/boot/test_atf: update U-Boot in TestATFAllwinnersupport/testing/tests/boot/test_atf.py+3 -41 reply
4/5configs/orangepi_zero_plus2_defconfig: switch to mainline TF-Aconfigs/orangepi_zero_plus2_defconfig+4 -41 reply
5/5configs/orangepi-zero-plus2: bump BSP versionsboard/orangepi/orangepi-zero-plus2/genimage.cfg configs/orangepi_zero_plus2_defconfig+7 -141 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.

Read the v3 thread

Cover letter [Buildroot] [PATCH v3 0/5] allwinner: arm64: use mainline TF-A

Hi all,

This is the 3rd revision of the patch set that replaces custom fork with mainline TF-A in Allwinner H5/A64 BSPs. The changes include:

- introduce TF-A selection menu to explicitly chose GCC stack protection
- switch from custom port to mainline TF-A in orangepi-zero-pluse2 BSP
- bump Linux kernel version
- bump U-Boot version
-- switch to combined u-boot-sunxi-with-spl.bin image
-- for now disable support for Allwinner SCP firmware

So far I have got no feedback from the boards custodians. So this time I only keep the board that I can test myself: orangepi-zero-plus2.

Regards,
Sergey

v3:
- rework TF-A stack protection approach: add selection menu
- only keep the board that I can test: orangepi-zero-plus2
- cleanup commit messages: TF-A instead of ATF

v2:
- as per Heiko Thiery suggestion, bump mainline ATF version to v2.5
- cleanup commit messages: use 'mainline' instead of 'upstream'

Sergey Matyukevich (5):
boot/arm-trusted-firmware: enable stack protection level selection support/testing: switch TestATFAllwinner to mainline TF-A support/testing/tests/boot/test_atf: update U-Boot in TestATFAllwinner configs/orangepi_zero_plus2_defconfig: switch to mainline TF-A configs/orangepi-zero-plus2: bump BSP versions

 .../orangepi/orangepi-zero-plus2/genimage.cfg | 10 ++-----
 boot/arm-trusted-firmware/Config.in           | 26 +++++++++++++++++++
 .../arm-trusted-firmware.mk                   |  8 +++---
 configs/orangepi_zero_plus2_defconfig         | 19 +++++++-------
 support/testing/tests/boot/test_atf.py        | 16 ++++++------
 5 files changed, 50 insertions(+), 29 deletions(-)
Signature · 1 line
2.32.0