Skip to content

arm: dts: imx8mp: Resync imx8mp device tree include

[email protected] u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v3 Latest9 patches 0 repliesNew

Patches in v3 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/9arm: dts: imx8mp: Resync imx8mp device tree include+0 -00 replies
1/9arm: dts: imx8mp: Resync imx8mp device tree include+0 -00 replies
2/9arm: dts: imx8mp: Add common u-boot dtsi+0 -00 replies
2/9arm: dts: imx8mp: Add common u-boot dtsi+0 -00 replies
3/9arm: dts: imx8mp-phyboard-pollux: Sync dts files with kernel+0 -00 replies
3/9arm: dts: imx8mp-phyboard-pollux: Sync dts files with kernel+0 -00 replies
4/9board: phytec: phycore_imx8mp: Change debug UART+0 -00 replies
4/9board: phytec: phycore_imx8mp: Change debug UART+0 -00 replies
5/9board: phytec: phycore_imx8mp: Add fec support+0 -00 replies
5/9board: phytec: phycore_imx8mp: Add fec support+0 -00 replies
6/9board: phytec: phycore_imx8mp: Set VDD_ARM to 0,95V+0 -00 replies
6/9board: phytec: phycore_imx8mp: Set VDD_ARM to 0,95V+0 -00 replies
7/9board: phytec: phycore-imx8mp: Enable DVS1 control+0 -00 replies
7/9board: phytec: phycore-imx8mp: Enable DVS1 control+0 -00 replies
8/9arm: dts: imx8mp-phyboard-pollux-rdk-u-boot: Add wdog pinctrl entry+0 -00 replies
8/9arm: dts: imx8mp-phyboard-pollux-rdk-u-boot: Add wdog pinctrl entry+0 -00 replies
9/9board: phytec: imx8mp-phycore: Switch to binman+0 -00 replies
9/9board: phytec: imx8mp-phycore: Switch to binman+0 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.

Read the v3 thread