Skip to content

arm64: dts: Fix USB 3 for rk3328 Rock64 boards

Andres Salomon stable 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 1 replyIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2arm64: dts: rockchip: add rk3328 dwc3 usb controller nodearch/arm64/boot/dts/rockchip/rk3328.dtsi+19 -00 replies
2/2arm64: dts: rockchip: Enable USB3 for rk3328 Rock64arch/arm64/boot/dts/rockchip/rk3328-rock64.dts+5 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH stable 5.10 0/2] arm64: dts: Fix USB 3 for rk3328 Rock64 boards

Hi,

At some point the USB 3 port broke on Rock64 boards; users report it working back on 4.4 kernels, but by 5.3 it wasn't any more (eg,
https://forum.armbian.com/topic/12439-rock64-usb-3-broken/).

These two patches add a USB3 node to the device-tree, which allows it to work again. I've tested a gigabit nic and was able to get close to 1000mbit speeds over the USB 3 ports. I'd love to see these two unintrusive patches added to 5.10.

Thanks,
Andres

Cameron Nemo (2):
arm64: dts: rockchip: add rk3328 dwc3 usb controller node
arm64: dts: rockchip: Enable USB3 for rk3328 Rock64

 arch/arm64/boot/dts/rockchip/rk3328-rock64.dts |  5 +++++
 arch/arm64/boot/dts/rockchip/rk3328.dtsi       | 19 +++++++++++++++++++
 2 files changed, 24 insertions(+)