Skip to content

Marvell SheevaPlug : convert Ethernet and SATA to Driver Model.

Tony Dinh u-boot 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 1 replyIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3Marvell Sheevaplug: Add DM Ethernet and DM SATA configsconfigs/sheevaplug_defconfig+5 -10 replies
2/3Marvell Sheevaplug: Use Ethernet PHY name and address from device treeboard/Marvell/sheevaplug/sheevaplug.c+42 -120 replies
2/3Marvell Sheevaplug: Use Ethernet PHY name and address from device treeboard/Marvell/sheevaplug/sheevaplug.c+42 -120 replies
3/3Marvell Sheevaplug: Add DM SATA and remove IDE configsinclude/configs/sheevaplug.h+4 -50 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/3] Marvell SheevaPlug : convert Ethernet and SATA to Driver Model.

- Add DM_ETH, SATA_MV and associated configs to sheevaplug_defconfig
- Remove IDE, and add SATA configs in board file sheevaplug.h
- Replace old device name "egiga0" with Ethernet PHY name from device tree.
- Replace the old Ethernet PHY addr lookup with a device tree parsing lookup function. Note that all Kirkwood SoCs boards use the same binding for Ethernet port 0 and 1 nodes from kirkwood.dtsi. Thus the new lookup function fdt_get_phy_addr() in this patch series probably should be factored out to a common fdt support function and used in other Kirkwood boards.

Tony Dinh (3):
Marvell Sheevaplug: Add DM Ethernet and DM SATA configs Marvell Sheevaplug: Use Ethernet PHY name and address from device tree Marvell Sheevaplug: Add DM SATA and remove IDE configs

 board/Marvell/sheevaplug/sheevaplug.c | 54 +++++++++++++++++++++------
 configs/sheevaplug_defconfig          |  6 ++-
 include/configs/sheevaplug.h          |  9 ++---
 3 files changed, 51 insertions(+), 18 deletions(-)
Signature · 1 line
2.20.1